Jump to content

Magnetic or Non-Magnetic Screwdrivers and Tweezers?

trigus

By trigus
in Tools & Equipment

 Share

Recommended Posts

trigus New Member

trigus

Posted
Posted

Complete novice here. After watching a few of Mark's videos on Youtube (great work, by the way) it appears that some of his tools are slightly magnetized.

My question is, in general what tools to you want to be magnetized and which not? Obviously, brass tweezers are going to be non-magnetic. Also I can see the value of having at least one pair of tweezers slightly magnetized. Advice?

  • Thanks 1
Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted

Anti magnetic tweezers are expensive, most people cant afford to have all their tweezers anti-magnetic.

You do not want tweezers or screwdrivers magnetized, magnetism is the bain of mechanical watches and causes all sort of issues, such as causing the coils of the hairspring to stick together making the watch run fast.

If your tweezers are not 100% anti magnetic they will eventually becomes slightly magnetic, whether that is from touching magnetized parts of watches, or just them passing through other magnetic fields.

If you work on quartz watches you will need atleast 1set of tweezers that is 100% ant-magnetic to pick up the rotor for most people a good set of brass tweezers will do.

For everything else rather than have 100% ant-magnetic tweezers having a demagnitizer is more important.

You can buy cheap ones off ebay and you will need one as its quite regular to find that a watch you are working on is slightly magnetized that you will need to demagnetize and so will your tweezers or screwdrivers after touching the watch.

Bottom line you don't want any of your tools magnetized and the only part of a watch you want to be magnetized is the rotor in quartz watches.

  • Thanks 1
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

Magnetised tools are a real problem when working on watches especially when working on Hairsprings. I have anti-magnetic tweezers the best and safest material is brass.  Screwdrivers can become magnetised and a quick zap on my demagnetiser sorts this issue. 

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

My advice is this. Whenever you are about to start on a new mechanical watch repair, make sure all your screwdrivers and tweezers and other tools you might use are de-magnetised. It is also good practice to de-magnetise the watch movement before attempting any repair.  It will also save you time.  

  • Like 1
  • Thanks 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...