Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By jackie01
      Hello guys,
      I want to show you my lately restoration project. This time it was a Seiko 7015-8000 with blue dial. Watch came to me in very poor condition. As you can see on photos the case was scratchty, crystal was totaly tarnished with deep scratches. Everywhere was dirt, gunk and mud...yuck. Movement was running and stopping with very low amplitude. After opened the caseback I wasn't suprised - it looked like as case - dirt and signs of wear. Rotor was loose and fall out the case. When I take off the crystall I saw dial which had faded Seiko logo, some scratches and hands which lost their lume.
       














       
      Next step was strip down the movement - everywhere dirt and dry old oil. Time to cleaning bath

       







       
      Look at this - it's my temporary balance wheel stand - I suspect that from temporary it will be permanent. It does job well.
       

       
      After cleaning it's time to assembly movement. Now it looks better - maybe not pristine but clean and shiny. New oil here and there and movement starts to run. Now it's time for bench testing before install it to the case.
       





       
       
      Meanwhile I took care of the case, dial and hands. Case got some polishing work - not to much cause I didn't want to loose the sharpness of edges. That is effect:
       





      Dial and hands got new lume - I am not perfect in this work but I still learn to do this. Additional the seconds hand was repainted to orange color. I didn't change the crystall but i just polished it with waterpaper and on the end polish paste. Effect suprissed me. Time for the  pleasant work - putting this all pieces together into the watch.
       







       

      VID_20190927_195610.mp4
       
    • By jackie01
      Hello,
      I started new project - Citizen 67-9119. It's seventies chronograph based on 8110A movement. Watch came to me as "fully working in great condition" As you can see there isn't crystal. The one which was here had chip and wasn't set properly in bezel so when i turned the watch it fall on the floor and broke. As you can see dial is in quite good condition, only it needs to be relumed. Hands needs to be repainted and relumed too. Movement works well but it is too speedy (  +3 min/24h). Chrono buttons work properly, only the hour counter stops at "3h" position so I must to take a look here. I striped down the watch and disassembled movement. There was some much oil everywhere so the cleaning is required. 















       
       
       
    • By jackie01
      Hello everybody,

      I open this thread to archive works on Citizen 8110A Bullhead. I purchased this watch in poor condition as You can see on the photos.


      Cause I have serviced few chronographs in the past I decide to try restore this watch. Maybe is not ractional from the economical aspect but we do this because we love it So let's open it.

      Hands are in good condition (required repaint and relume) but the dial has broken legs and tachy scale is faded :/ I think it's really hard to find orginal and there is no gold aftermarket replacement - sad. Look at the movement.







       
      Gosh, what a dirty place It needs good cleaning and oiling. 
      But the biggest problems are this.


       
      Broken post on main spring bridge and missing rocking bar core and screw in gear train. I need to find replacement.

      While I'll be working on movement the case and pushers are send to renew - putting new gold plated coat

       

      Stay tuned
       
       
    • By adsterb
      Hey everyone, I cant find out how to get this drown off and I've tried everything. The Miyota JS25 movement says PUSH and points to a hole which I've learned means this is where you press to reease the crown but I still can't get the crown out no matter which position the crown is in. I first tried with the crown all the way out then with it halfway in, then all the way in and haven't been able to get it out, please help.


    • By Calvin
      Hello guys..
      Why my seiko speedtimer 7015 chronograph run smoothly when its day(morning till evening)
      But its stop and heavy when its time to changing the day date,whats the problem and how to fix it..
      Thankyiuu
  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Thanks for the welcome Johnnie, cheers, Mark
    • I usually lay the cap jewel flat side down on a piece of clean paper and rub it back and forth a few times. This will get rid of the residual oil. Next a rinse with lighter fluid and it should be as clean as it can get. Usually wear on cap jewels is pretty much centered in the middle of the jewel, I suspect its dried up oil. But if the watch is only 2 years old and never been serviced before it should be pretty much pristine! Its a puzzle all right. Anilv
    • i bet those sets aren't cheap. i'm sure i can order individual ones from Cousins though. Next problem.... what is best best way to measure the inside diameter of a jewel, they're so small
    • Hello all.  I have an 1882 waltham 18s sidewinder that doesn't work.  Not sure if this is the first watch I should try my hand at.  it's a grade 802, has a lever movement but it is in a pendant case or I think so.  not sure if these were supposed to be sidewinders set up like this.  The stem pops up as well.  The watch balance wheel will move back and fourth if you set it at almost a 30 degree angle.  if you pick it up or tilt it, it will stop on an dime.  with the balance moving none of the hands move.  also when you spin  the stem in the counter clockwise position, the hands move counter clockwise regardless if the stem is up or down or if the lever is in or out.  If you turn it clockwise it acts like it wants to wind, but the hands will slightly move as you do. Should I try to tackle it or find another non running watch to try my first look see at?  
    • Yes parts are available, but for a complete mov't cost of about USD 100 you will find that most watch repairers will not want to spend time in attempting repair. BTW, please do no not hook into existing project topics just because you have a same watch. We have a dedicated section for repair questions. 
×
×
  • Create New...