Jump to content

Tag Heuer parts

Colditz
 Share

Recommended Posts

Colditz WRT Addict

Colditz

Posted
Posted

Hi All

I am working on a Tag CAP2110 Aquaracer and the bezel ratchet spring is missing. I need to get a new one. OD 38 approx. ID 35 approx. Can someone point me in the right direction please.

Thanks in advance.

 

Link to comment
Share on other sites
bjd1020 WRT Addict

bjd1020

Posted
Posted
Hi All
I am working on a Tag CAP2110 Aquaracer and the bezel ratchet spring is missing. I need to get a new one. OD 38 approx. ID 35 approx. Can someone point me in the right direction please.
Thanks in advance.
 
Cas-ker maybe......eslinger is also a good place but you may get the "are you a watchmaker" interrogation. Ofcourse ebay is another last resort.

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites
bjd1020 WRT Addict

bjd1020

Posted
Posted
Hi All
I am working on a Tag CAP2110 Aquaracer and the bezel ratchet spring is missing. I need to get a new one. OD 38 approx. ID 35 approx. Can someone point me in the right direction please.
Thanks in advance.
 
https://www.esslinger.com/watch-bezel-spring-no-6-tag-heuer-watch-rotating-ring/

Not the exact size but they have others.

Sent from my SM-G950U using Tapatalk

  • Like 1
Link to comment
Share on other sites
bjd1020 WRT Addict

bjd1020

Posted
Posted
Esslinger? I have ordered from them several times. No watch Gestapo there.
Its probably just me......lol. Im sure I sound like a complete novice when I call. I cant remember which one, although I know it wasnt CasKer. They actually wanted a copy of my "certification" when I called to order parts. It was one of the major distributors though I do know that.

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites
MrRoundel Super WRT Addict

MrRoundel

Posted
Posted

 

I wouldn't be surprised if parts houses all dislike filling small, non-watchmaker orders. I remember that La Rose was very good about this, but they really expected you to know what you were ordering before you called. The reality is that when it comes to the novice and watch-parts, there's just no money in it after you factor in phone time, higher potential for returns, etc. You understand this, I'm sure. If you order online after figuring out the part information, you shouldn't have any problems getting an order in.

Good luck with the Tag. They may be part of the watch cartel, so a factory part may be difficult. But for a bezel spring that shouldn't really matter if it's an aftermarket. Cheers.

 

Link to comment
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...