Jump to content

Smiths Diver & Hello!


jaycey

Recommended Posts

First up the interesting part :)

1969/70 Smiths Diver made in Cheltenham today.

image.jpg

Not so interesting...

I am a training Horologist (EFHC) living in London. I am into my second year of training and progressing nicely.

My other interests are Open Water Swimming & Mountain Biking.

I am training as a hobbyist rather than a potential professional but when retirement comes in quite a while yet, who knows?

Up to now I have covered many hand wind movements with day/date complications including instant changers.

Quartz servicing.

I have covered a few Autos like the Seiko's, ETA 28-- series and have just begun my first chronograph, a ETA 7750 which is disassembled, cleaned and just waiting on some lubricants before I begin the reassembly.

Marks videos have been a great help to me and I thank you for them. Cheers!

Link to comment
Share on other sites

Welcome jaycey, I love Smiths watches and Pocketwatches myself and currently have 3 watches plus numerous Pocketwatches in my collection...

Sent from my iPad using Tapatalk

Edited by daz
Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I picked up a similar amount of these jewels some years ago in a watch and clock fair. Every now and then they come in handy. This week I've got a rubbed in bombe jewel in the balance cock that is cracked and needs replacing. Very handy to have a vintage assortment of these type of jewels!
    • Great diagram with the teeth and pinion count. Simple way to reduce the speed of the hour wheel by the 12:1 minute wheel. Genius and yet so simple. Always good to reinforce the principal by what you have done in your drawing. Keep doing that. I had a drawing on my wall for years showing me this which is very similar to the drawing you have done. Here's a formula to work out the beats per hour of a watch movement. The movement's BPH is dictated by the wheel teeth and pinion count and the hairspring being vibrated to the correct BPH by finding the pinning up point on the hairspring using a vibrating tool.  The reason in the formula there is X2 on the top line is because there are two pallet stones.
    • So I just wanted to say "thank you" again.  The angle is the key bit it seems and yes, it did basically just fall, or float, back into position when I got it lined up just right. I had meant to add that now that I see how it goes in, I totally see how it came out in the first place, and that whomever cloned the original movement didn't pay much attention to the fine details around the setting or how it interfaces with the balance cock or the "rings" on the regulator and/or stud carrier arms.
    • Well I’ve never seen the make before and cannot find any info, I haven’t got it just yet it’s been left to me among a 1970’s sea master and a mid size yeoman. But if anyone has any information on this one please feel free to enlighten me, many thanks 
×
×
  • Create New...