Jump to content

Here is a real gem French Carriage Clock.


oldhippy

Recommended Posts

They don’t come much better than this.  It is superb in every way. You will not find cases like this. I used Google to translate all the French.

 

https://www.ebay.co.uk/itm/french-carriage-clock-quarter-hour-repeater-1840/323822002371?hash=item4b654ba0c3:g:hzsAAOSwoahcxC2m

 

Pendulette called monocase gilded bronze with a small ring (quarter of repetition + silence) dating from 1835 to 1840, it bears the production number 17 stamped on all important parts that compose it. It is certainly a very small production. It has its original wooden box covered with brown leather with gold edges embossed on all angles, the key (not original) is in a compartment at the bottom of the box. there is a hinge that has been restored (brass screw on the lid at the back) this clock has its original tailgate anchor whose plate, anchor bridges and escape wheel are covered with a mercury gilding (also of origin). The rear door is made of beveled glass pressed into a bronze element by force, all slides in the rear pillars of the cage and is pulled out from above. The pendulum can be silenced with the key thanks to the square steel located in the right corner at the back, following the engraved indications. the hours and the quarter of hours are done on two brass (brass) stamps superimposed. The bell works by giving the necessary time to spend a stamp and a quarter of an hour devoted to the two stamps. The hour and quarter hour repetition is done by pressing the button above the clock.

 

The functioning of this clock is guaranteed (restored in the workshop www.horloger-chastant.fr) but it remains a very old object of collection and which can sometimes make oddities of operation on the ringtone, to think about it before committing itself purchase.

. The movement (ringing and walking time) works for 8 days, so it must be reassembled every week. the key allows the winding of the alarm clock and the setting of the trigger time, to put the pendulum in silent mode, by setting the time.

 

All work done on this clock are made in compliance with the ethical rules of restoration of watchmaking objects (www.horloger-chastant.fr)

that is to say without modification or embellishment of the timepiece and using for the lubrication of oils and mineral synthetic fats or high-end (Moebius ...)

 

By buying a restored clock, the investment is heavier at first but wins later, because a chronometer bought in the state without restoration will stop in a short time (before 6 months / 1 year of maximum operation), which will quickly involve a visit to the watchmaker; moreover the oxidation often present, not always visible will continue to increase, the corrosion due to the old oils on the points of pivot of the gears will continue its work of wear (on the pivots of the gears in particular).

 

PRECAUTIONS AND TIPS: it is desirable to manipulate the pendulum with cotton gloves to prevent the oxidation of the hair by sweaty fingers (if the fingerprints it is necessary immediately without waiting to pass a soft cloth without product), respect the direction arrows to set the time and the alarm clock). It should not be exposed near a heat source (working chimney, radiators, halogen spots, sunlight).

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I'm assuming that every time you set the watch you are work hardening the detent spring, maximum hardening is  where it meets the plate due to maximum deflection.   That's why it snaps there.  The Young's modulus may be the same but after it's reached its maximum yeid strength it breaks.  My mechanic engineering is very rusty, correct me if I'm wrong. 
    • Ah ok yes that makes sense to polish it where the arm starts to form from the body of the bridge, i thought you meant the underneath of all the arm.
    • this is something I've never quite understood about the some of the Swiss companies. In 1957 Omega was using 9010 for the keyless parts with epilam. there's been a slow migration towards using heavier lubrication's but still typically oils and epilam to keep them in place. When it seems like 9504 works so much better.  
    • OK, welcome in the world of alarm clocks... I guess the 4th wheel is dished because it is from another movement. If it was not dishet, then it would not mesh with the pinion of the escape wheel, am I right? The marks of wear on the 4th wheel pinion doesn't corespond to the 3th wheel table position, at list this is what i see on the picts. Calculating the rate is easy - there is a formula - BR = T2 x T3 x T4 x T5 x 2 /(P3 x P4 x P5) where T2 - T5 are the counts of the teeth of the wheels tables, and P3 - P5 are the counts of the pinion leaves. Vibrating the balance is easy - grasp for the hairspring where it should stay in the regulator with tweasers, let the balance hang on the hairspring while the downside staff tip rests on glass surface. Then make the balance oscillate and use timer to measure the time for let say 50 oscillations, or count the oscillations for let say 30 seconds. You must do the free oscillations test to check the balance staff tips and the cone cup bearings for wear. This kind of staffs wear and need resharpening to restore the normal function of the balance.
    • Glue a nut to the barrel lid, insert a bolt, pull, disolve the glue.  Maybe someone will have a better answer. 
×
×
  • Create New...