Jump to content

Battery / Movement for a Zeitner Aquagraph

AlanSurry
 Share

Recommended Posts

AlanSurry Member

AlanSurry

Posted
Posted

Hi.  I'm new to the forum.  I have a modest collection of watches that we've bought over the years.  One is a Zeitner Aquagraph that was opened up to replace the battery, which was subsequently lost before the replacement battery was ordered.  The movement appears to have the name Ronda on it and looks gold plated.  What I need to know is what size battery this takes and if that's not the problem, is the movement worth replacing?   Thanks in advance for any suggestions.          

Link to comment
Share on other sites
Gpsluvr WRT Addict

Gpsluvr

Posted
Posted

We need to see the movement or for you to get the number off of it. If it has a black frame the number will be on the frame, otherwise it will be in tiny numbers on the plate. Most of them are from the 500 family and use a 371 battery. Very common battery for Ronda’s.


80f1f88248e4e6428227c6acad370607.jpg


Sent from my iPad using Tapatalk Pro

Link to comment
Share on other sites
AlanSurry Member

AlanSurry

Posted
  • Author
Posted

Thanks.  definitely 715.  I've seen these movements on ebay for about £5 or £6.  Is that right, are they that cheap?  I saw the same watch sell for about £25, so it's obviously not worth spending a lot on, but I'd rather repair it even if I spend a disproportionate amount of time on it.  I assume it's not difficult to remove the wider?      Thanks again.  

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
×
×
  • Create New...