Jump to content

Seiko Sportsmatic behaving strangely


Recommended Posts

I have just finished servicing a Seiko Sportsmatic, calibre 410 (same as 6619).

Everything is fine when the watch is on the winder- consistently losing 30s a day, so should be easy to regulate within +/- 10spd. Before going ahead with the final regulation I wore the watch (I usually find that spd is different when worn compared to my winder). That's when the strange behaviour happened: the watch gains 3 minutes in a day. Fine overnight. The next day gains a lot during day (around 20s per hour). When I put it on the timer everything looks good- all 5 positions within +/- 30 spd, (and CR -70).

What could be causing this behaviour?

 

One possible clue: the amplitude is high for a Seiko - 310 degrees.

Link to comment
Share on other sites

38 minutes ago, Barnaby said:

If there was a problem with any of these parts wouldn't the watch run badly when on the winder?

310 degree and good time keeping, indicates higher wheel speed, the wheel can pick up even more speed (by strong sudden move of hand) such that impulse pin wouldn,t  be at the right position to receive energy from the fork horn, rather  passes by the horn ahead of time, so can happen if pin guard is bent.  No strong sudden move by the winder. 

Have you red  the thread titled "temperature dependence" ?

I hope this helps.

 

 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Dell fancy a challenge🤣   https://www.ebay.co.uk/itm/285785684626?itmmeta=01HT29WVJY21Q94C73GYHGBTFX&hash=item428a277a92:g:15YAAOSwNRVmBAUz&itmprp=enc%3AAQAJAAAA0DIe4QLQBW66rSyIMiyBuk8GY%2B86pQ%2BQnxGbcNq7egAGe5DIs9YMmiWJIbZtMSxwNJIiJxuojbq523IeUSBQ6pJEIQ0tfz2ChrBR03BksmKINyklg1IK4GAfAcYY9Hta9wVeSZSZN7ZCNAfZTgKs9c4%2BUIUZ3Qjc3QjUXDn2uPRo1FiYOEewMG5A26EXb%2BclBgrqtbOmM6P3bea%2F8ZImOAXNI1HtbmtMk84pIGoM6ISwaM1PKFuADtTFMccS5e3ZjndCbXYXHrW3CecsV0edw3M%3D|tkp%3ABk9SR8q588nQYw
    • A already know the size movement I have the problem is the dial a had purchased has a dimension 20.6mm wide a want to find a watch case that going to fit the dial perfectly 
    • Hi.  I would like to take issue here regarding battery driven , watches, clocks,etc. I will and do repair these clocks in fact I have sever al in my collection as well as the regular mechanical ones. I have one on my mantle piece over 60 years old tha belonged to my wife’s Aunt,  long gone Iam afraid and it has been cleaned etc and never missed a beat and is accurate. Every one has their preduices as regards Electrical /electronic Horology but I regard it as part of the progress time line of the art of Horology and to be treated as such. Like Darwin’s theory of evolution it evolved.  Two cavemen knocking rocks together and a shard broke off , looking at it he worked out if it was stuck on the end of a stick he would have a spear. Likewise his pal seeing what he was up to picked up a piece  and did the same, now that’s evolution. Some clockmaker decided to build a clock that ran with a battery and no spring to wind up and break, progress and both the mechanical and battery driven clocks evolved, the battery ones got better to the point that if it broke you changed the complete unit. Likewise watches did the same but both can be repaired by people who approach Horology with an open mind without preduice.  We all have our likes and dislikes bu I for one would never dismiss any technology because I don’t like it.   The mobile phone is a good example of modern technology at work as is the automotive industry. There buttons and switches in my car I don’t use because to me they are not nesessary but I still drive the car.
    • I haven't gone through all the reading of what it might be or not. The first thing I would do if nothing obvious stands out is replace the mainspring, you have to start at the source of the power. Nine times out of ten that is the problem.  
    • Haha. You're just in a wicked mood today John 😅
×
×
  • Create New...