Jump to content

Newmark Pin Pallet


Deggsie

Recommended Posts

 

There is something very relaxing, maybe reassuring about the sound of this relatively loud Pin Pallet Newmark watch. I picked it up on eBay some years ago in a non working state and discovered as usual that the balance pivots and hair spring were to blame. Anyway, a similar movement came up for grabs and luckily the balance and hairspring were fine. The old newmark received a donor kidney and is now ticking away beautifully. Mind you, my wife says it drives her mad!

 

I’m told these were manufactured at Croydon, in Kent England, adjacent to the now defunct airport. I’m not certain though.

 

bfcba7df91e504a8db931a71493d80b0.jpg&key=5c06008d0bd33e616b3a9294f72eca4e9fad1b9d9a7794729e0ac8d7bdf9307c

4ea995cbdd4b68a6cf93096a11756170.jpg&key=4bd00bae343672441ad43e928ecd63f24084076501a9305bc3bbb435513d4ef9

9dba696feedc3d8d0c282172180a25b5.jpg&key=334ec2ce73007db08a861bd9c6d7edadf37cea515f49feada43012a257ad7edf

 

 

Sent from my iPhone using Tapatalk

 

 

 

  • Like 2
Link to comment
Share on other sites

I have a couple of Newmark branded watches. They seemed to do quite a range over the years. From what little I can gather of their history, they were more of a watch importer and seller latterly, but they did put together quite a number of interesting watches.

Mainly their offerings were at the affordable end of the spectrum, which in a way makes them more interesting from a historical point of view. Not everybody could afford a Rolex, but brands like Newmark, Timex, Saxon and others were more indicative of the zeitgeist. These brands and styling are very much of their time, and that, to my mind is a major part of their appeal.
 

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

There's nothing wrong with their design really.The one you have even has a shock protected balance.It's a pity they didn't put them in better cases.

Agree with you about the cases. They are ww2 era; perhaps costs were being kept to a minimum for affordability?


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

  • 3 weeks later...
Late coming to your post of 15th May but, yes, the Newmark company was based in Croydon and the movement in your example is their own in-house movement which they named only as the 10.5'''.
Regards.

Thank you balaton. I appreciate your information.


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...