Jump to content
  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • When I'm reading this discussion are we talking about cleaning the watch movement parts or the watch case parts?
    • Go to YouTube, search video by " staying sane " see his video Elgin 293 Disassembly at 4.01 into video you can see levet at 6 o'clock at very bottom of screen, it is in up, locked poistion. see linkage to keyless works. Movement put in case this way time cannot be change by crown.  
    • The rim lever is under the dial. The case has screw on front, body with stem and crown, and screw on back. To change lever you must remove movement from body. The movement. only will come out the front and the movement. two screws that hold movement to body are on rear of movement. Therefore, the front and back must be removed, then take movement out of body. The inside body rim holds lever in " locked " or " unlocked " position. A picture with case front removed only shows the watch dial, the lever is under dial. I guest this it the mystery, why would you make a watch that can be put in case and the time cannot be set without removing movement completely from case ? I think you may be able to remove front, remove back, turn 2 movement holding screws 1/2 turn, tilt movement up just enough to move rim lever then but back together. I would take more pictures, but I had such a time with watch hands I am not going to remove dial again.
    • I measured it out, but the measurements didn't line up with anything out of the Incabloc catalog. I took a step back, and assumed I was simply having a hard time getting a good measurement on such a small and flexible piece, and thought maybe I could approach it from the angle of seeing what would have come with whatever movement it was based on. Once I realized it was a Chinese original, I pretty much figured I was screwed. I placed my orders for everything else, and I guess it's just going back to the "art" bucket. My order from Switzerland finally made it to Queens, so hopefully I'll be moving on to movements worth buying parts for soon.
    • WOW!! That is a beautiful lathe and accessories. Use it well. Sent from my iPhone using Tapatalk
  • Create New...