Jump to content

A lovely little lusina


Recommended Posts

 

My father recently asked if I would service his wrist watch which he bought from the NAAFI at RAF Akrtiri in Cyprus during his national service days. The watch came to me as ticking, but the oil on the keyless works had gummed up like tar, making it almost impossible to wind without fear of doing some damage. Anyway, here are a few before and after photos.

805157ed7f5f0f54675b348331405f85.jpg&key=9ea7a81db374a4bdcb16567a54e28a2e5cf80148c43b8c801d782ec72ad82a0a454bee0bab97a7e67ad2e442f1179a0d.jpg&key=82e558458ea9e57e55200cffd9ea998c7dd211ebf0825e60ad62715ffb9561268dac5c132a4366a84a5abc3556f2964c.jpg&key=80041b84f4d9d76f99dc2fdb71cf76dc80369aef895c90c8320d8051543593b6f70212f3ea753fc27900d2be4b0d11fa.jpg&key=3d27ee69266b1256dd177fc5966cee7c23dc42810deb9606fd696690048477cb

 

 

Sent from my iPhone using Tapatalk

 

  • Like 5
  • Thanks 2
Link to comment
Share on other sites

Bravo1.gif  , How did you clean the dial? startle.gif  

 

Hello Nucejoe. I discovered through trial and error with old scrap watches that a laundry product branded as ‘shout’ in the UK works very well as a dial cleaner. I spray on and leave about a minute for the surfactant to do its work. There is no requirement to agitate the surface. After the minute, straight into a bowl of lukewarm water to dissolve the surfactant, then another bowl of warm water to ensure no trace is left. I then absorb excess water and and dry in a stream of warm air. Of course it cannot work magic and restore any damage but at least all the oil is removed. Unfortunately the lume dots are still dull and don’t work, but that’s another skill I need to learn [emoji6]

 

 

Sent from my iPhone using Tapatalk

 

  • Thanks 1
Link to comment
Share on other sites

Your father's watch? What an honor.

Thanks. To be honest I actually bought a spare eta 2390 to practice with first.... didn’t want to make any mistakes with this one


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

1 hour ago, Deggsie said:

Hello Nucejoe. I discovered through trial and error with old scrap watches that a laundry product branded as ‘shout’ in the UK works very well as a dial cleaner. I spray on and leave about a minute for the surfactant to do its work. There is no requirement to agitate the surface. After the minute, straight into a bowl of lukewarm water to dissolve the surfactant, then another bowl of warm water to ensure no trace is left. I then absorb excess water and and dry in a stream of warm air. Of course it cannot work magic and restore any damage but at least all the oil is removed. Unfortunately the lume dots are still dull and don’t work, but that’s another skill I need to learn emoji6.png

 

 

Sent from my iPhone using Tapatalk

 

Thank you  @Deggsie , good thing I asked, I was contemplating on oil of olay.:lol:.

Link to comment
Share on other sites



×
×
  • Create New...