Jump to content

Mysterious 7750 Chrono Bridge


Recommended Posts

I have read through all my tech data on the 7750. This will be the 4th one I have purchased for parts and rebuilt. The chrono bridge here in this one is unfamiliar to me.....can snybody shed some light on where it comes from???6779ddbad85ee17d254629492a17dcbf.jpg

 

Sent from my SM-G950U using Tapatalk

 

 

Link to comment
Share on other sites

It Might be one of those 7750 derivates used by Longines and others, could you take a picture closer to the balance, there it should say what model it is, might say something like A07.XXX?

Link to comment
Share on other sites

It Might be one of those 7750 derivates used by Longines and others, could you take a picture closer to the balance, there it should say what model it is, might say something like A07.XXX?
A05H21

Sent from my SM-G950U using Tapatalk

  • Thanks 1
Link to comment
Share on other sites

5 hours ago, bjd1020 said:

A05H21

I see noirrac1 found the data, this might have been in a Hamilton Khaki Field Chronograph.

It is a nice treat getting to see this beauty, thank you.
 

  • Like 1
Link to comment
Share on other sites

14 hours ago, bjd1020 said:

The add on ebay had it listed as a vintage Omega. I had to replace the balance and rotor. I paid 60 bucks for it.

Sent from my SM-G950U using Tapatalk
 

That's an unbeatable price for a 7750 even with having to buy a balance and rotor. A brand new 7750 day/date is nearly $500 from J Borel.

J

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
×
×
  • Create New...