Jump to content
oldhippy

Something to lighten the day.

Recommended Posts

28 minutes ago, oldhippy said:

As much as that. You have been robbed.

Robbed... positively fried I would say. However, on the plus side, I can use it as an excuse to tell terrible  sausage jokes... 

Capitalism, Socialism, and Communism have a meeting for tea at noon. Capitalism and Communism arrive on time, but Socialism is nowhere to be found. Finally he arrives, out of breath and apologetic." I'm sorry," says Socialism, "I was standing in line for sausage." Capitalism says - "What's a line?" And Communism says - "What's a sausage?"

... or ...


There were two sausages in a frying pan. One sausage turned to the other and said "man its hot in here", the other sausage looked shocked turned and said.. "Now there's something you don't see every day...  a taking sausage!!"

... or if that doesn't tickle you ...

 

There's this butcher and one day just as he is about to close the shop for the day a dog came in with a note in his mouth.
The note read "Can I have a steak and three sausage links please?"
The butcher took the note and gathered the things.
When he turned back around he was surprised to see a twenty dollar bill in the dog's mouth.
The dog grabbed the meat in a bag and left the shop.
The astounded butcher decides to close up his shop and follow the dog.
The pair soon came to a bus stop.
The dog looked at the schedule and sat down on the bench.
The first bus came and the dog got up and trotted over to the front of the bus, looked at the number and sat back down.
Another bus came and again the dog looked at the bus number and saw it was the right one.
He got on, the butcher closely following.
The bus rumbled on and the dog jumped up walked to the front of the bus, leaped up and rang the bell to stop the bus.
The dog got out with the butcher in tow and headed off down the street. After some time they turned in to a driveway.
The dog bounded down the tarmac to the door and clattered the letter box.
The dog did it again and hopped up on a fence to peer in the window. The canine knocked on the window with his paw then jumped back on to the tarmac, grabbed the meat and walked up to the door.
The door opened and a man walked out and started to yell at the dog.
The butcher ran up to stop him. The butcher said "What are you doing? This dog is amazing!"
"What are you talking about? This is the second time this week that he's forgot his key!"

BTW - Pro tip.. Do NOT Google "Sausage watch"... just saying... :wacko:

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • When working with small metal parts, (not necessarily watch parts, but this applies with those too), I will superglue the part to something I can easily hold, for example plastic card stock, or some other metal, then file away, drill, etc.  then dissolve the superglue in acetone to remove the part.
    • A bit of a classic Timex. So much so that Timex recently released a Snoopy version of the new Miyota automatic based Marlins, and a bunch of other self homages in the Peanuts Charlie Brown, Snoopy & Friends range. This more petite version, I'm guessing from the mid seventies, is the one I remember from my childhood, blue dial and all. It is heading in my direction as a "non runner" (no surprises there), and I was the only bid at £1.93  
    • I have recently purchased a National, Electric Watch Cleaning Machine. Attached is a photo for reference and identification of the model type. As can be seen, it has a fairly typical design, reminiscent of many other types, particularly Elma Super Elite. In fact, I do wonder which came first - the National or the Elma. My musings on this point later. This is a very old machine, circa late 1940’s, 1950’s, but they seem to turn up sometimes on eBay, in various conditions ranging from the “beyond hope” and only really suitable as a donor for parts, and the “old but serviceable” and might-be-worth-a-punt-on machines. This one fell into the middle somewhere, as it was a bit tatty and the heating element did not work. On the plus side, it had all its original cleaning fluid jars and lids, and the motor and speed control gave smooth, controllable spinning and no play in the bearings. I went to visit the seller to inspect it and we did a deal on the spot. This is not always possible on eBay, but as the seller had listed it as for collection only (due to its weight), it was a possibility on this occasion. Once I had it home and gave it the once over, I decided that I would have to either do without heating for the drying stage, or find a replacement element. At the same time, it was very obvious that all of the original cabling was not safe to leave in place and it would all have to be removed and replaced. Any other electrical parts deemed unsafe would also be replaced as I inspected them. So - the idea of a restoration (of sorts) was born. Now - it is not my intention to restore it to the point where it could pass current electrical safety standards, but I will be making it as safe as possible, without losing any of the essential character of the original machine. This is not going to be for resale, so being safe to use is an acceptable compromise, in my opinion. I will however, perform testing on it once the electrical work is done, to make sure that the essential aspects of earth leakage, earth bonds and polarity etc. are passed. (PAT Testing included.) Whilst this is not likely to turn into another example of a superb restoration of an Elma Super Elite (as seen elsewhere on these forums), I hope at least to have at the end of it, a perfectly serviceable watch cleaning machine, and a restoration story - of sorts - of a vintage piece of English watch making and servicing machinery. So first off - the before pictures. This one is a good view of the machine and its cosmetic condition, as purchased. The base is a heavy, cast alloy jobbie, with its original crackle paint job beginning to flake away in places, where the years of cleaning chemicals have attacked it,  but generally sound. The jars still had residues of cleaning and rinse chemicals present. The first wash jar (front left), was particularly grotty and can’t have been cleaned for years. Fairly ironic not to clean the thing, that cleans the things! Maybe it was just left unused and unloved for many years. The mains cable was a cloth-bound type I have not seen in years and could well have been original as it still had the old UK wiring standard colours of red/black/green. Also adding to the vintage-ness, was a very old, Bakelite three pin plug. This must have been one of the first of its type as I have not seen one in brown Bakelite before! (And I am 62...) Anyway, that’s enough for now, as I’m not even sure anyone wants to read much about such an old machine. If anyone is interested though, please add comments and I’ll add to the story as I make progress. At the very least, I hope I have found a potential solution to finding/ making your own heating elements for these old machines, which could also include providing replacements for Elma Super Elite, RM80/90 HCS511 etc. Machines. More details later...
    • Wood is surely more sustainable and cheap than brass... I noticed that sometimes people like clickspring (makes videos on tooling and clockmaking) use some kind of superglue to hold metal together.  At 6:54, if you get bored...  
    • I've just bought a small amount of the Horotec Episurf-Neo, which is advertised as a 'next gen' epilame treatment. Directions for use say 30 second dip, 60 second dry at air temperature. So no heat required. I too am looking for a cheap DIY alternative to the special dip bottle. I've been experimenting with the little filter baskets from the water inlets on washing machines! Haven't found the perfect solution yet, but I'm working on it!    
×
×
  • Create New...