Jump to content

Recommended Posts

Glad to be a part of what seemingly looks to be a very knowledgeable forum! My watch hobby is just budding and is expanding from basic modifications to "tinkering". I look forward to pouring through all the resources here!

Wrist check: currently wearing an SKX009 on blue silicone strap

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • If you look carefully at the actual statement its loose pallet stones etc. It's more of a generalization statement. The graphical display comes from the sounds of the escapement. One side of the escapement produces one line the other side the other line. Then there's a problem with timing machines and liquid crystal displays we can see the pixels. So the upper line is migrating relatively straight across the display moving up one pixel at a time but remaining straight. The lower line looks like it's wandering around both going up and down. It really should look more like the upper line. So anything that affects the escapement affects the sounds shows up on the display. As it looks like only one side then it would be typically one side of the escapement. So loose pallet stone possibly even the roller jewel which would affect both could be damaged and I've even seen a loose roller jewel only show up on one side. Escapement lubrication one stone gets lubricated the other does not look like this along with anything that screws up the escapement dirty escapement etc. So cleaning examining and re-lubricating would be a good idea. Then a watch made in the early 70s isn't exactly a vintage watch it really should look a little better.
    • Could the brass coloured washer be a dial washer? The second part... no idea, how thick is it? Can we see some pictures?
    • Look into Omega pushers. They have the same construction as the Breitling . Not sure which model now so you have to do some research.  
    • I received my Ronda 703 movement today, it had a couple of extra parts with it that I have no clue what they are for. The first is a brass coloured washer  - roughly 2mm outside diameter, 1mm inside diameter and curved. The second is brass coloured plate about 5mm x 1.5mm with an open ended hole at each end. Does anyone have an idea what these are for?  
    • I always put the crown to the metal parts of the timegrapher. I have experience that it's not always the best if in the case and i am not putting the crown to the left. Can be that the case use a plastic spacer and the TG won't hear the sound as good.   Interesting as i have a Lemania 3600  that i changed the spring in . Used the same method as you did.  Feels like it slipping . But the TG says it runs okay. Time will tell if i works as it should. 
×
×
  • Create New...