Jump to content
AntiqueHorology

Post your Instagram Handle here...

Recommended Posts

I know a lot of collectors and hobbyists are on Instagram, and post their collections and projects there. Not sure if a post like this already exists, but it didn't develop after a search. 

 

Here's mine: www.instagram.com/antique_horology

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • If you are in no hurry I could stripp one keyless down and make a small tutorial of it.  I seldom use the Moebius 8000 anymore but put it on at request   If one would buy some luricants and don't bother  about the mainspring it would be a setup like this.. Fine oil Moebius 9010 - On the escapement parts (It's here you can use Moebius 8000) Thick oil Moebius HP-1300 On the most other parts which needs to be lubricated  Grease Moebius 9504 Like on the winding pinion and so on.. Special for pallet stones Moebius 9415.  
    • Okay, I made a bit of time to get this project moving forward, it may take me a year at this rate. I had to get another cylinder as the original had all the pins bent. As you would expect nothing fits, therefore I had to bush the new cylinder to fit the shaft. I also had time to polish the fly and rebush it. A note, I added a photo of getting it level for those new to clock repair (horizontal and vertical) as these are long pins and if off a bit forget about them working smoothly. 
    • Thank you for your introduction and welcome to this friendly forum.
    • A faceted crystal has ..faces but not a lip. Seiko did not use glue often, and the crystal will not leave by pushing with a thumb. Fortunately, Seiko helps watch repairers by classifying and documenting the case construction, here we have an "A" as stamped on the case back. Attached the guide. A good discussion is at https://www.plus9time.com/seiko-case-back-information BTW, I recommend the OP to use the "Watch Repairs Help & Advice" section when it's repair question like this. One advantage is that there answers can be rated and marked as resolving.   1982.03 Seiko Case Servicing Guide.pdf
    • Well abused Elbon.DIY leather strap.
×
×
  • Create New...