Hi warming the case is just that not heating as such. The Idea being just to soften the adheisive enough to enable removal, The pusher/button gaskets are usually silicone rubber so should not be affected, But should the adhesive prove difficult then remove the pushers/buttons. cheers
Yes, must use a low voltage instrument. Normally I mention that, sorry I didn't this time, but the manual does:
Ohmmeter with a test voltage higher than 0.40 V unsuitable, recommended voltage 0.20 V
This is everybody's question. But there is no secret place for parts, they can be simply unavailable outside the manufacturer network. In your case a new module is, I believe, the best way.
Should I lubricate the post that the roller jewel goes on? What about the eccentric cam on the date driving wheel that the roller rides on? Marks videos do not show lubrication in these areas. What's the prescribed procedure?
Hi. I inherited an Enicar sherpa graph watch from my father. Can anyone recommend a reliable repair shop in New York City? This watch has a huge sentimental value, so I don't want to entrust it to just anyone. Many thanks for any suggestions. Heather