Jump to content
AP1875

Bergeon 4509 silicon 7

Recommended Posts

I bought some Bergeon silicon 7 to put in my grease container for gaskets.

 

How much of the silicone should I remove from the bergeon container onto the foam pad (I think it is a 5 gram container of grease)?

 

If I remove it all from the Bergeon container and put it in the foam will it store OK?

 

This grease is pretty expensive so just want to check before I make a mistake.

 

Sent from my SM-G975F using Tapatalk

 

 

Share this post


Link to post
Share on other sites

I'm not sure how much you need on the foam pad to grease the gasket sufficiently, so was wondering if there is some left over on the foam it will be OK to use next time. So if that was the case I could just empty it.

Basically I don't really know how to use the product with the foam pad, so just wanted to check as it's expensive.

Sent from my SM-G975F using Tapatalk

Share this post


Link to post
Share on other sites

There should always be some left over on the foam, you should be able to grease about ten thousand gaskets before needed to add grease. (Slight exaggeration, but it lasts a long time.) When you find that gaskets are coming out too dry for your liking, add some, maybe the size of a green pea, and spread it around on one of the foam sponges. If you put tons you might saturate the foam and the gaskets come out with way too much.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...