Jump to content

Easter fun with Top Clop

HSL

By HSL
in Your Walkthroughs and Techniques

 Share

Recommended Posts

HSL Distinguished Member

HSL

Posted
Posted

The other day I got "The feeling" when looking at some what Andy call 404 watches, there was on that just svreamed buy me so I did.
I thought what can go wrong with a superiour watch called Top Clop De Luxe, must for sure be one of the kind and extremely rare.
Said and done i through in a bid for a dollar and won it like a land slide victory.. after a couple of days it magicly appearde on my door step and I brought it in for a royal overhaul.

My first thught was ..wounder what that 21 is? well atleast it got an famous Unbreakable Mainspring ! 
Well when I turned it around and removed the back it felt like something was missing.
It didn't really look like the "High End" BF 866 I'm used too..

Top_1a.jpg

Top_2a.jpg

Top_3a.jpg

  • Like 1
  • Thanks 1
Link to comment
Share on other sites
HSL Distinguished Member

HSL

Posted
  • Author
Posted

So I got into a panic state and thought lots of a lot bad things until I just popped the movement out.

I found an donor movement with the same diameter .. ST974 and measured the diameter of the dial legs..
Found a box with dial legs lying around and picked out the right ones.
With a marker pen I put out the correct positions.
Pulled out the soldering station and the special soldering paste.
 

 

Top1_b.jpg

Top2_b.jpg

Top3_a.jpg

Top3_b.jpg

Link to comment
Share on other sites
HSL Distinguished Member

HSL

Posted
  • Author
Posted (edited)

But instead of soldering the dial legs into place I decided the Top Clop needed the state of the art solution and the dial legs got glued into place.

Top3_c.jpg

Edited by HSL
  • Thanks 1
Link to comment
Share on other sites
HSL Distinguished Member

HSL

Posted
  • Author
Posted (edited)

After a couple of hours the dial was ready to pop into place.. 
It fit like a champ.

So on with the dial hands.

And the movement ring and the winding stem.

Top4_a.jpg

Top4_b.jpg

Top4_c.jpg

Edited by HSL
Link to comment
Share on other sites
HSL Distinguished Member

HSL

Posted
  • Author
Posted

And behold the TOP CLOP DE LUXE flies again.
But I still don't know what the 21 stands for but at least it now has a 17 jewel movement..

Tha folks is everything I can contribute with for Easter Fun...

Top_5.jpg

  • Like 3
Link to comment
Share on other sites
bsoderling WRT Addict

bsoderling

Posted
Posted

I think I had my eyes on this one when it was out for sale on Swedish Tradera...?

Decided someone else needed it better and was obviously correct :-)

Btw, what glue did you use for the dial feets? Have tried epoxy and superglue but find it hard to make them stick.

Nice job!





Sent from my iPad using Tapatalk

Link to comment
Share on other sites
HSL Distinguished Member

HSL

Posted
  • Author
Posted
On 4/19/2019 at 9:26 AM, bsoderling said:

Btw, what glue did you use for the dial feets? Have tried epoxy and superglue but find it hard to make them stick.

Yes it's of course from Tradera, when one gets the urge the shipping time is substansial shorter from there, the finds might vary in quality though it seems to be lots of watchrepairmen leving specimen like these in this shape there..
When putting on the dial feets on cheaper dials where the heat for sure will ruin the paint I only use Loctite glues like this one Locktite 638, one probably could use a 2 component too but on a piece like this it's just a waist of time. 
But since in my experiance the most times glued dial feet pop of is because they are slightly offset, the two component would give you slightly longer time to adjust the feets perfectly. To rough up the surface on both the feet and dial makes it stick harder too.

Sorry for the late responce but as you know it's easter hollidays in Sweden and I went to Copenhagen to sample some other merchandise

in the sun ;)

IMG_20190420_154938.jpg

Link to comment
Share on other sites
bsoderling WRT Addict

bsoderling

Posted
Posted

Looks like you found some good stuff there...I found myself a really bad spring cold. No fun when the sun is shining and you want to be out enjoying the nice weather. And watch work with a runny nose isn’t to recommend either...

Tradera is the place where I usually find my cheap objects to tinker with. Ebay too often ends up costing more to get the thing home than what the seller gets.

I guess I need to take a step up on the value ladder to fix that balance but somehow that takes away a bit of the charm for an amateur like myself.






Sent from my iPad using Tapatalk

Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
On 4/18/2019 at 11:21 PM, HSL said:

But instead of soldering the dial legs into place I decided the Top Clop needed the state of the art solution and the dial legs got glued into place.

Top3_c.jpg

Hi, been looking for dial feet like this, perhaps amazon offers them for sale, What key words for search, returns this dial feet, What to call them, just spare dial feet glue solder?

I noticed you call BF866 a high end piece, I hope you were not kindding. Didn,t know, are they? 

Regards

Link to comment
Share on other sites
HSL Distinguished Member

HSL

Posted
  • Author
Posted
1 hour ago, Nucejoe said:

I noticed you call BF866 a high end piece, I hope you were not kindding. Didn,t know, are they? 

lol.. well they got one jewel and that is on the balance cock so one can do the math from that.. of course they are in the extreme cheap segment.. ;)

  • Thanks 1
Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
1 hour ago, bsoderling said:

Cousins have them in a wide variety, both assortments and specific sizes, cheap and a bit more pricy.






Sent from my iPad using Tapatalk

Thank you B,  What are they called?  Replacement dial feet?  

Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
12 minutes ago, HSL said:

lol.. well they got one jewel and that is on the balance cock so one can do the math from that.. of course they are in the extreme cheap segment.. ;)

I have got bunch of calender pointers with bf866 movement, the brand name is patrius.  

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HectorLooi
      Without Our Forum

      By HectorLooi · Posted

      Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
×
×
  • Create New...