Jump to content

Fixing loose pallet fork jewel

ftwizard

By ftwizard
in Watch Repairs Help & Advice

 Share

Recommended Posts

ftwizard WRT Addict

ftwizard

Posted
Posted (edited)

I have a loose jewel, as per the title. It's only a spare movement, so I don't want to buy a replacement fork.

I don't have, nor have I ever used, Shellac. It's not a route I want to take just for one jewel.

The question is, what else can I use to re-fix the jewel. Superglue maybe?

 

Edited by ftwizard
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
1 minute ago, ftwizard said:

I have a loose jewel, as per the title. It's only a spare movement, so I don't want to buy a replacement fork.

I don't have, nor have I ever used, Shellac. It's not a route I want to take just for one jewel.

The question is, what else can I use to re-fix the jewel.

Hmm, not sure if you want to be told you can use super-glue? One stick is £7.30 from Cousins UK, I don't think that would break the bank.

Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
Posted

A palate fork jewel requires a special tool to hold the palate fork in place to heat the palate fork and melt the shellac. I have replaced many impulse jewels and have made a few videos on YouTube on how to do it. Search for jdrichard01 on YouTube.


Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites
MarkL Member

MarkL

Posted
Posted

I am very new to this watch repair malarkey, but, I know that knotting compound, for painting on wood prior to priming, is made up of shellack suspended in alcohol. I would try to daub the pallet jewel with this knotting compound. The alcohol will evaporate very quickly leaving the shellack holding the jewel in place. I'd probably daub it several times using a very fine oiler. If there is someone out there who thinks this is a bad idea, please tell me and kindly explain why. Best wishes, Mark 

Link to comment
Share on other sites
saswatch88 WRT Addict

saswatch88

Posted
Posted
4 hours ago, MarkL said:

I am very new to this watch repair malarkey, but, I know that knotting compound, for painting on wood prior to priming, is made up of shellack suspended in alcohol. I would try to daub the pallet jewel with this knotting compound. The alcohol will evaporate very quickly leaving the shellack holding the jewel in place. I'd probably daub it several times using a very fine oiler. If there is someone out there who thinks this is a bad idea, please tell me and kindly explain why. Best wishes, Mark 

buy a vintage pallet warmer from ebay or you can use a bluing pan or tin over an alcohol lamp. I highly doubt you will be able to use the existing shellac since the jewel is already loose, its not like your just making an adjustment, the damage is already done. but i would say its worth a try. i think the issue your going have with knotting solution is holding the pallet jewel in place for 15-20 minutes, which is how long it takes for the solution to dry. if its dries in the wrong spot you will be back to square one. Plus the consistency of alcohol based shellac is very thin and has no holding power. pure shellac is very thick and sticky almost like honey when its heated correctly and it dries fairly quick.

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted

I buy shellac for woodwork by weight at the hardware store. I don't doubt the friendly guy there would give me few leaves for free. I don't know if it can be used for watchmaking but if anyone wants to try I can mail a small quantity for postage.

Link to comment
Share on other sites
saswatch88 WRT Addict

saswatch88

Posted
Posted
22 hours ago, jdm said:

I buy shellac for woodwork by weight at the hardware store. I don't doubt the friendly guy there would give me few leaves for free. I don't know if it can be used for watchmaking but if anyone wants to try I can mail a small quantity for postage.

is it pure shellac? as in solid form not liquid?

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • oldhippy
      Movement inserted from crytal side

      By oldhippy · Posted

      Before putting it back in the case I would fit the hands and use a pin vice on the stem to make sure the hands were in line. 
    • Jon
      Introducing myself

      By Jon · Posted

      Hi there  
    • Jon
      Movement inserted from crytal side

      By Jon · Posted

      Put the movement in a movement holder and it will be supported as you push down on the setting lever post to release the winding stem. Make sure the post is over the shoulder of the movement holder so what you are pressing down on is supported. As a general rule, hold the movement and not the movement holder. Replace the hands when the movement isn't in the case and support the centre jewel (if it has one) on a hard surface or staking block when replacing the hands to stop the jewel accidentally moving or even coming out. A dedicated movement holder with a central jewel support is even better, but pricey
    • JohnR725
      Main spring

      By JohnR725 · Posted

      It might help us if we knew which watch like model number.
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Hi, guys I have a bit of a predicament and hopefully, somebody can advise. I'm working on a Roamer MST 521 where the movement is extracted from the crystal side. I'm now at the final hurdle where I need to replace the movement back into its case but I'm not sure of the correct procedure. I still need to fit the hands but that's where the problem lies. If I insert the winding stem to test the hands for correct alignment I will need to turn the movement over to release the stem again it's the spring-loaded type and needs a small bit of force to push down but with the hands fitted, I don't think I can do this on a cushion without causing some damage to the hands and that's the last thing I want to do, this watch has already been a love-hate relationship and I'm so close to boxing this one off which I'm counting as my first major project.  The other option is to case the movement then fit the hands and hope everything is okay. I've already broken the original winding stem but managed to find a replacement, the last one in stock, so I'm a bit reluctant to keep removing it. Any suggestions would be appreciated. 
×
×
  • Create New...