Jump to content

Old desk clock


philipk5

Recommended Posts

As part of my ongoing learning curve I am interested in finding out a bit more about the history of this clock. ( I hope the markings on the dial between the numbers are not Chinese characters!)

The movement winds and runs but the hands seem to be loose and have a mind of their own.  All in all a pretty clock (in my opinion)! 

Thanks

P4020001.JPG

P4020003.JPG

P4020004.JPG

P4020006.JPG

P4020009.JPG

P4020010.JPG

  • Like 1
Link to comment
Share on other sites

There seems to be conflicting "information" when searching the net regarding when Le Coultre became Jaeger Le Coultre, and thus finding the latest date for my clock. There also seems to be no relevant info on Le Coultre and Sandoz, hence my posting on here.

I think it has always been a desk clock and not a framed pocket watch?

The overall size is 2 3/4 inches square.

Link to comment
Share on other sites

Your clock appears to be a desk clock of the strut variety, it should have a fold out strut at the back for standing the clock up on a desk, A.lecoultre merged with Edmond Jaeger in 1937 becoming Jaeger lecoultre there after, although in some markets they still marketed clocks and watches under the Lecoultre name alone mostly in American markets.

Sandoz used various other names for watch production Tavannes, Cyma, being the best known, the link with lecoultre is that Sandoz supplied Calibres to other companys including Lecoultre, the first two years of production of Lecoultres most famous watch the Reverso used a Tavannes movement.

I would say that your clock would be from around the 1920's.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Instead of using tweezers, put a piece of rodico onto a toothpick or pegwood. Then set your spring to the rodico, this way the spring is not under any tension when floating it back into the bloc. As you bump into the bloc when trying to find the entrance the rodico will give but still holds onto the spring ie. You wont have the rigidity of tweezers.
    • If frank says these bombè jewels are for balances and similar pivots then they are used cupped side facing the pivot and then capped i assume. In Nicklesilver's reply i guess that cup can also be reversed and used as an oil reservoir leaving the shoulder riding on a less frictioned domed surface. 🤷‍♂️ Hence the use of them on wheels closer to the escapement that have less torque requiring efforts to reduce friction and are also uncapped.
    • Looks that way, if it had any amount of significant jewel count it would say so on the dial.    Looks that way, if it had any amount of significant jewel count it would say so on the dial.  Same answer as Mike regarding the dial, its often just a slapped on name of a retailer but i thought you were way above this understanding Pete ?
    • Light naptha is what you need to be looking for. The carbon to hydrogen ratio is high with heavy naptha, it doesn't evaporate as well as light naptha and is prone to leaving more residue. Try tom's suggestion of the mirror test.
    • Its a big item Michael and a lot that could go wrong with the process of getting it to its new location. I once helped install one of these units into a conservatory that i had built. It was big and bloody heavy and took six of us to get it in safely. If you have sliding doors and you need to remove the whole frame then that may or may not go well. But i would advise getting a professional in if you have little knowledge on the installation of them. The glazing of the doors could well be 6mm laminated glass which again will be heavy very heavy if the glazing units are big. The glass would also need to be set up and packed correctly to open the doors properly more so if they are unframed and the sliders are upvc. Seems a shame but if no one is biting and that may be due to having no warranty i guess the only takers might be someone that installs them for a living and knows how to repair. If its fibreglass just be careful, i sometimes have to cut fibreglass baths out and they are nasty to work with . Thick gloves are definitely recommended,  not fun picking out fibreglass spells two days later that have started to go septic. Good luck with it all matey.
×
×
  • Create New...