Jump to content

Old desk clock


philipk5

Recommended Posts

As part of my ongoing learning curve I am interested in finding out a bit more about the history of this clock. ( I hope the markings on the dial between the numbers are not Chinese characters!)

The movement winds and runs but the hands seem to be loose and have a mind of their own.  All in all a pretty clock (in my opinion)! 

Thanks

P4020001.JPG

P4020003.JPG

P4020004.JPG

P4020006.JPG

P4020009.JPG

P4020010.JPG

  • Like 1
Link to comment
Share on other sites

There seems to be conflicting "information" when searching the net regarding when Le Coultre became Jaeger Le Coultre, and thus finding the latest date for my clock. There also seems to be no relevant info on Le Coultre and Sandoz, hence my posting on here.

I think it has always been a desk clock and not a framed pocket watch?

The overall size is 2 3/4 inches square.

Link to comment
Share on other sites

Your clock appears to be a desk clock of the strut variety, it should have a fold out strut at the back for standing the clock up on a desk, A.lecoultre merged with Edmond Jaeger in 1937 becoming Jaeger lecoultre there after, although in some markets they still marketed clocks and watches under the Lecoultre name alone mostly in American markets.

Sandoz used various other names for watch production Tavannes, Cyma, being the best known, the link with lecoultre is that Sandoz supplied Calibres to other companys including Lecoultre, the first two years of production of Lecoultres most famous watch the Reverso used a Tavannes movement.

I would say that your clock would be from around the 1920's.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • These are all American movements (with the exception of the "Rubis"), and are all almost certainly "negative set" which means the stem is part of the case. So it's normal that they are all missing- they are with their cases. You will need male square bench keys to wind/disarm them. Vintagewatchstraps has a great writeup on the different systems. But basically, any American "x" size movement will fit any case for that size, possibly with some adjusting of the stem position. With Swiss movements, there is some interchangeability between calibers, usually within the same maker's range, but not really overall- there are thousands of different stems out there.
    • Hi, I'm very new to watchmaking and this is my first time posting here.  I've bought a lot of 10 vintage pocket watches size 0s from e-bay and just got them today.  Most of the balance wheels sprung quite freely and thus seemed like a worthy endeavor as a first batch for exploration.  I've just realized that none of them have any winding stems. Is there any way I could source appropriate winding stems for the movements? There seems to be assortments of various stems selling in bulk on aliexpress, but would any of them fit?  I've read on other threads that some people lathe their own stems (which is waaaay out of my current skill set, which is pretty much nil). Others say that you 'just have to try a few and see if they fit'. I would much appreciate any advice for this matter. Thanks!
    • Nice work.  In the last year, I have been servicing Accutron 218s.  I have the official Accutron hoder that provides electrical contact to the movement.  It is a pretty clever design.  There is a cut in the ring of the holder (shaped like a "C").  When in relaxed state, the holder is slightly smaller than the watch movement.  You spread the cut slightly and drop the movement in and release.  Very clean.  I have made 3D versions of this setup.  Have not explored using it generally for other movements.
    • Double Oooooo   Removal tool? Dreamed of one of these. However, Kalle on Chronoglide showed everyone my system with the pegwood. Worked a treat. Felt so chuffed to be mentioned. https://www.youtube.com/watch?v=tTFrXjiyGKc 46:40 for the wheel removal. Mentions me at 50:00 and does the removal with the pegwood. Felt like my 15 minutes of fame.  
    • Sirius. Thank you for helping others with that information. This is why this forum is so good.
×
×
  • Create New...