Jump to content

Spring - Time to get outdoors


Recommended Posts

I am one of those that hates the sun..... nah not really :).

My plan for next week is sorting out the shed. It needs a new coat of paint as I replaced one of the doors last week then it’s emptying it all, sorting out the junk, and making it into a proper workshop. At the moment I cannot actually get in to do anything.

Oh and the grass needs cutting.

Link to comment
Share on other sites

There is nothing to stop you enjoying the garden and  a little bit of horological entertainment too.

RIMG0487.thumb.JPG.e46d470fb122e0ac8cf793435aff7865.JPG

This little 17 Jewel "Regency" is getting put through its paces prior to some final polishing and cleaning, while I do some cleaning up in the garden at the same time.

RIMG0482.thumb.JPG.1ba10fcbacd3b094a2bafcbab9be06be.JPG

It is perhaps not as attractive as what settled down on a rock next to me to sun itself, but not too shabby either.

RIMG0502.thumb.JPG.b08993ab575a2296229150e431c5e4dd.JPG

This peacock butterfly settled for a few minutes next to me, before heading off in search of nectar.

Link to comment
Share on other sites

Mate I’m only the 3rd owner, 1st was a rig worker so she sat on the quayside in Scotland for a month at a time then my sister had it in the borders, then stored outside for 18 months!!!! So a new roof fitted and other bits then the under side reared its ugly head, every corner was rotting, due to blocked drain holes. Underside done now it’s abit of internal wing work and some brake hoses. Then full respray!!! Only done 63k in total so not really run in yet, well worth keeping for that weekend play thing.

Link to comment
Share on other sites

mine is original model year 1990 with 87 k miles and I'm the 3 th owner.  It began its life in Ohio, the owner moved around a few times and ended up in New Jersey.  My brother bought it 12 years ago and 2 years ago just gave it to me.  How could I say no!

No rust that I can see and it got a clean bill of health on the last mechanical inspection.  The one thing I had done than was to replace the chrome tip on the tail pipe.    Will post a video of a weekend ride through the neighborhood soon.

 

Link to comment
Share on other sites

Nothing exotic for me I'm afraid. As I live on 10 acres located within the boundaries of a national forest, I'm blessed with an abundance of 100 ft tall trees. Did I mention that trees shed dead limbs much like my Great Dane sheds hair? I've been piling and burning a bumper crop this spring. I've mowed once already and I need to do so again. At the moment though, a late spring cold front is moving through my area bringing rain. So, for the time being, I'm stuck playing with watches. Oh darn!

Edited by TexasDon
spelling
Link to comment
Share on other sites

Typical fickle eastern NC spring weather... sweating one day, teeth chattering the next.One grass cutting so far. seal went on the bottom of the mower.. took the belts with it.. Car ? 1990 volvo 240.. dont know how many miles are on it, the thing eats speedometers. at least 300,000 miles on it maybe more.

Link to comment
Share on other sites

15 minutes ago, yankeedog said:

Typical fickle eastern NC spring weather... sweating one day, teeth chattering the next.One grass cutting so far. seal went on the bottom of the mower.. took the belts with it.. Car ? 1990 volvo 240.. dont know how many miles are on it, the thing eats speedometers. at least 300,000 miles on it maybe more.

I have a Volvo V50 with around 240,000 miles on it.

Volvo may charge an arm and a leg for parts (which manufacturer doesn't these days), but they are pretty robust.

Mine has had a bit of suspension work done, and a couple of batteries, brake disks and all the usual consumables, but it surprised me when it sailed through its last MOT.

A couple of years back, I bumped in to someone with a white 240, from 1976 as I recall,  that looked like new. From memory, I think it had about 400,000 miles on it.

Link to comment
Share on other sites

Texas tends to be truck country more than most other areas although SUV sales are overtaking them. I drive my late wife's 2012 Toyota Camry most of the time (62,000 miles on the clock). With a small amount of acreage, I have to have a truck. Mine is a 2005 Dodge Ram 1500 with 245,000 miles on it. The difference in fuel economy is startling. The Camry gets 32 mpg regularly. The Dodge, with a tail wind and a downhill route might one day get 15 mpg. So far it hasn't made it though.

Edited by TexasDon
Link to comment
Share on other sites

4 hours ago, TexasDon said:

Nothing exotic for me I'm afraid. As I live on 10 acres located within the boundaries of a national forest, I'm blessed with an abundance of 100 ft tall trees. Did I mention that trees shed dead limbs much like my Great Dane sheds hair? I've been piling and burning a bumper crop this spring. I've mowed once already and I need to do so again. At the moment though, a late spring cold front is moving through my area bringing rain. So, for the time being, I'm stuck playing with watches. Oh darn!

10 acres lots a thing of the past up by me unless you are looking at commercial property.  And if not commercial those sized spaces are getting bought up and turned in "55 and older" sites.

and what is a red convertible without a cute blonde?

 

 

 

Lucy.jpg

  • Like 2
Link to comment
Share on other sites

Just back from a little staycation here in Ireland... weather was beautiful for a change. As people say here, it'd be a great little country if you could put a roof over it!

IMG_7735.JPG

IMG_7701.JPG

IMG_7693.JPG

IMG_7664.JPG

IMG_7543.JPG

Edited by JBerry
  • Like 3
Link to comment
Share on other sites

1 hour ago, TexasDon said:

Did you check to see if there were any fish of edible size in that stream?

I didn't unfortunately, left my harpoon back in the tent. Good Salmon fishing in Delphi though, the area of the last picture

Edited by JBerry
Link to comment
Share on other sites

Now it's warm enough to begin cultivating the flowers here too, we been struggling for a few years to fill out the 4 acre garden with plants and flowers. The right tools for the work makes wonders.

IMG_20190407_121744.jpg

  • Like 1
Link to comment
Share on other sites

Continued the spring clean up this past Saturday which included flower bed edge trimming,  plant relocation, laying some blue stone and 

moving some very large rocks.  All went great, except for the fact I wound up in the hospital with what the doctor called a micro heart attack.  Root cause was two blockages that were cleared and repaired with stints.  So JerseyMo is still ticking and ready for the next 60 years just might not be around so often.

Wish you all the best. 

 

Link to comment
Share on other sites

7 hours ago, JerseyMo said:

Continued the spring clean up this past Saturday which included flower bed edge trimming,  plant relocation, laying some blue stone and 

moving some very large rocks.  All went great, except for the fact I wound up in the hospital with what the doctor called a micro heart attack.  Root cause was two blockages that were cleared and repaired with stints.  So JerseyMo is still ticking and ready for the next 60 years just might not be around so often.

Wish you all the best. 

 

I hope you have a speedy recovery. Take it easy.

Edited by AndyHull
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Typically for introductions all you would have to say is hi I am interested in repairing watches and nobody's going to care about the technical details. Then to certain degree the introductions are not life or death in some cases I guess it depends upon what you did when you came to the discussion group. It's good that you're getting a balance complete for variety of reasons and getting a bonus balance bridge. Because I want you to pay attention to something when you get it as your hairspring still has a problem quite an amusing problem in a way. You notice your hairspring stud is a triangle or shape and it fits into a triangular shaped hole. It also notice how your hairspring has some weird bending right around the stud? So when you get your new balance bridge and the balance complete if you look carefully you'll find that I'm pretty sure the stud will be rotated and that they hairspring will come out the end not the way it's coming here you have managed to twist the stud putting it into the hole and that's why it looks so bad in the previous image. If you are skilled at fixing hairsprings which are not you can fix this. On the other hand are getting replacement so that's good. No it's supposed to be straight up and down. So in addition to twisting the stud you also bent it. On the other hand this is the most common place where people like to bend their hairspring and yes if you had practice with bending hairsprings this is all relatively sort of easy to fix. But I would really suggest practicing on another watch or basically scrap of balance wheels off of eBay that nobody cares about. Because practicing on something you care about really isn't the best. Then the reason I wanted the image below was to see how the balance jewel assembly is attached to the bridge. Sometimes it needed jeweling tool to push it out but in this particular case all you have to do is remove the U-shaped clip in the whole thing falls apart. But if you're lucky here replacement balance bridge will solve the problem.
    • I still need to see the complete movement as there are many types of Elgin movements. The part that you are holding is called a snail. 
    • Just a quick update on my T17. I just finished the service and, boy, was this nerve-wrecking.... I bent the hairspring a few times. Stupid accidents. Once it was beyond repair and I had to get a donor movement. The replacement hairspring turned out to be a few millimeters shorter and therefore the watch was running 6min too fast even when the regulator was set to the slowest position. So I needed to get timing washers (see another post here: https://www.watchrepairtalk.com/topic/25505-30t2-adjustment-of-timing-washers/?do=findComment&comment=248100).  After all, I'm now, getting a 310° amplitude (fully wound, dial up, lift angle 54°). About 250 in vertical positions. Quite a drop, but apparently not too abnormal for a 90-year-old watch with a slow beat rate (18000bph) and rather heavy balance wheel. After 24h I still get 280 (horizontal) and 220 (vertical). And now the highlight:  66h of power reserve! You may remember that I posted that I used a slightly weaker, but also slightly longer mainspring than prescribed. See my comments above.  I used GR 3937 (instead of GR 3632). So I recommend this mainspring and ticker oils (9020 on escape wheel and HP1300 on the rest of the train).   Some random pictures..
    • OK! I was able to get a nice set of timing washers from ebay! And they worked really well. I needed to slow down the movement by about 6min and I put four (=two pairs) of 3-minute washers (rated for the the size of the movement) and it did pretty much exactly that. On one pair of screws, there were already washers. So I added a second washer on those screws. Maybe not ideal, but it doesn't cause any problems. Poise is ok.. not perfect.. but I had so many issues with the watch that I decided to accept it. It's a 90-year-old watch. Delta is around 40 seconds.   
    • I think it is friction fit, there are tools to remove them, cheaper versions are available. You could try adapting some pliers, see my crap drawing.  The pushers are available in various sizes, you could measure once the tube is removed. 
×
×
  • Create New...