Jump to content

Chinese Lathe Price List


jdm

Recommended Posts

Hello after a long time.

To help in purchasing one, I have published a price list of the lathe and accessories sold on Ebay by sincereclocks.
https://docs.google.com/spreadsheets/d/e/2PACX-1vSWfhOjlAfpI_c1EWF8MPSKnbIVIPoIH6mxCC1nVYQPQ8cJbiwBhLc1v597F9Z_AZteVKsfJ1lZDOOe/pubhtml

That is the same classic "Geneva Pattern" C0608 lathe as described on the specialized website:
http://www.lathes.co.uk/chinese-watch-lathe/
Its qualities have been already been discussed here and on many other places, so all I wanted to do is to summarize the options available, using a more conventional part naming.My opinion is that the product is still overpriced in relation to its industrial cost by a good 100%, especially for some parts. For example, the 3 jaws chuck sold for $155 is a common Furda K01-50 plus adapting arbor, available elsewhere for $60. And the seller make no discount on the lathe purchase with an accessory set, howeve a 5% discount is offered if the transaction is made directly.

Since the same product is also sold under the bran Vector by Boley.de, and described as "inexpensive".  I've included a summary of that option. I'll make no comment on its price, but at least the wooden box looks great.
In another post I'll summarize the ready choices available for getting a new micro or mini lathe.

 

 

Edited by jdm
  • Like 1
  • Thanks 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I voted leave too, my reasoning was the the EU is undemocratic, no elected officials. I don't regret it but I  am sad that both sides acted like petulant toddlers.  Shameful.  I'm not on other forums but if I was and left this site, would you shun me? Of course not, we aren't petulant toddlers.  
    • This is a type of tool that may be suitable to remove the bezel - though note that I'm pretty sure the watch should be face down - not face up, as in some of the photos of these tools on amazon & ebay! If you try one one of those, put the movement screws back in first to avoid accidents. https://www.amazon.co.uk/Removal-Professional-Remover-Watchmaker-Diameter/dp/B09XCH4QVN?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A296NCMMFVXSDN&th=1  
    • Hi, I’m constantly asking my wife to help me with removing the stem in order to complete casing. To expand, this is not a challenge for me when the setting lever is secured by a screw (older calibers). However when the setting lever is attached to a spring loaded setting lever axel, like on more modern calibers, I simply don’t see how to apply enough pressure on the button to get the stem out short of putting the movement face down with the dial and hands attached, which I’m loath to do in order to avoid damaging the dial/hands? what technique should I be using? thanks  
    • Many thanks for your advice (being borne in mind at present) & offer Dell. When I was given the clock the plastic anchor was loose on the arbour (it had split at the 'hole') &, after repairing this, I have been trying to determine whether the spindle (pin) should be perpendicular when the pallet is sitting on a flat surface; or whether, when installed, its L-R extremes (or alternatively its tick & tock points) should lie at equal angles from the vertical when moved with spring absent. I can get the clock to run but in every such configuration the top block has to be turned anti-clockwise (from above) by quite a bit in order to be 'in beat' & it always runs fast (despite the pendulum being set to as slow as possible). This makes me wonder if there is any particular feature of/fault in a torsion spring clock which determines which turn direction (if any) is necessary to get it 'in beat'; & whether there would be a different set of settings that would get it running nearer to time at somewhere around the mid timing/inertia position which would then allow tweaking of the fast/slow setting.
    • Now this has happened I bet China or India just to name two will start to produce none genuine parts.  I did. But idiot Boris Johnson failed miserably in his negotiations. The E U stitched up the UK like a kipper. Nigel Farage  offered his help but big head Boris declined. So this is why we are in this mess all because Johnson wasn't clever enough.  
×
×
  • Create New...