Jump to content

Anyone got a parts list for 1960-70s Citizens ?

mikepilk

By mikepilk
in Watch Repairs Help & Advice

 Share

Recommended Posts

HSL Distinguished Member

HSL

Posted
Posted

I collected a bunch of balance numbers for the Citizen I worked with and think yours should be 039-39.

039-11 cal 1800
039-18 cal 2710
039-22 cal 2201,2101,2210,2110
039-39 cal 5201, 5202, 5203, 5204
039-41 cal  0180
039-45 cal 2111,2211
039-69 cal  6601
039-85 cal  6501
039-1020 cal 8200

On the bay there is an ad for these...

https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=Balance+complete+CITIZEN+520*+5230+5260+5270+5290+bilanciere+completo+721+NOS&_sacat=0

  • Like 1
Link to comment
Share on other sites
mikepilk Distinguished Member

mikepilk

Posted
  • Author
Posted
8 minutes ago, HSL said:

I collected a bunch of balance numbers for the Citizen I worked with and think yours should be 039-39.

039-11 cal 1800
039-18 cal 2710
039-22 cal 2201,2101,2210,2110
039-39 cal 5201, 5202, 5203, 5204
039-41 cal  0180
039-45 cal 2111,2211
039-69 cal  6601
039-85 cal  6501
039-1020 cal 8200

On the bay there is an ad for these...

https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=Balance+complete+CITIZEN+520*+5230+5260+5270+5290+bilanciere+completo+721+NOS&_sacat=0

Thanks. I thought it might be. There's a 039-039 balance on ebay for a 5430 - which is a similar movement to the 5204.. 

Capture.PNG

Link to comment
Share on other sites
HSL Distinguished Member

HSL

Posted
Posted

There were a bunch of movements using the same balance staff and therefor probably the same balance complete.
Here are some:

5201, 5202, 5203, 5204, 5210, 5220, 5230, 5260, 5270, 5290, 5400, 5401, 5420, 5430, 5460, 5470, 6400, 6420
  • Like 1
  • Thanks 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
×
×
  • Create New...