Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Good to be here, found this place while trying to find out what or where I was going wrong with a Seiko 6119 movement,  just wondering how come i have never seen it before.  I am Francis married with 3  children, all under 10, yes I started late since I am 55 and wifey is 33.  Started off doing pocket watches and somehow now getting into Wristwatches.  Still trying to work that one out. Bought a lot of movements some 10yrs ago and have had them stored away, and now we decided to put down roots, i dragged it all out and now trying to learn more and more as I go along.  Francis Downunder.
    • Today was my 1970s Zodiac Super Seawolf
    • The stem looks like thread worn at top, but might be just the angle of picture. As for the hands not turning, possibly something has slipped on mechanism, like a spring. http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&Longines_23ZS might be worth comparing the picture with yours. 
    • hi I'm working on a longines .caliber 23zs. It was not working and i noticed if you moved it the balance would start and the hands revolved until the second hand reached number 5 where it was catching. To cut a long story short i have removed the hands and refitted them and there going fine. But when i went to reset the hands nothing. I pulled he crown out to the position to move the hour and minute hands and there nothing happening. it turns freely but the hands don't.The crown has now come off as well but that screws back on though it seems loose. I have cleaned the stem and examined it to the best of my knowledge and it seems fine. It slides in and out when i release the screw holding it into the movement. I have tried to download docs from cousins but they only show dial diameter.  I have also googled it but there's not a lot out there.Not what i need anyway. I'm just wondering have i missed something obvious that should have been done.. Any advice gratefully accepted. cheers gary
    • if you have a tap and die set,   (and a lathe) just thread a hole in a brass rod and you have the perfect "screw holder".    doe's not work on left handed thread.    vin
×
×
  • Create New...