Jump to content

Introductions

Sean

By Sean
in Introduce Yourself Here

 Share

Recommended Posts

Sean Member

Sean

Posted
Posted

Good day, a while ago I felt the need for a hobby and I like collecting...things, so...why not pocket watches? I currently only have 6 or maybe it's 8? watches and am enjoying them. I believe the next start for me would be to gain the ability to service these things of marvel myself, and to a degree of professionalism. I have some movements coming my way that currently don't work, so I'll be disecting them to learn why, and perhaps even repair them, but the motive is to learn. 

Is there a basic tool kit that a newbie ought to look to acquiring that you would recommend? Head mounted loupes? Lighting? Work stations? All suggestions welcomed and understand I am very new to this. 

Thanks in advance, 

Seán 

Link to comment
Share on other sites
JBerry WRT Addict

JBerry

Posted
Posted

Level one of Mark's watchrepairlessons goes through in nice detail what basic tools are required as well as giving you a nice grasp of what is involved in watchrepair. Judging from the fada, I don't suppose you are in Ireland Seán?

Sent from my Redmi 4X using Tapatalk

  • Like 1
Link to comment
Share on other sites
Sean Member

Sean

Posted
  • Author
Posted

Thanks JBerry; I'm not in Ireland, or Irish for that matter, rather Canadian born and bred, of Scottish parents who came to Canada in the 1950's as teenagers themselves. The fada is a hold over from Britain where although Sean would invariably be pronounced "Shawn" by most, it can confused with "Shane" (Seán and Seàn respectively). 

After making the introduction I noticed Mark's course curriculum. I may avail myself. ;-) 

Thanks for the response, very much appreciated JBerry.

Seán  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • nevenbekriev
      Main spring

      By nevenbekriev · Posted

      Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...