Jump to content

Buying Tools in Canaca


mcoulton

Recommended Posts

Hello

Can anyone make a suggestion as to the best place to buy or order tools in Canada? I've looked at the sites listed within the forum resources page, however I find the selection isn't as extensive as ofrie.com. When buying tools from the States, do I have to pay duty on them since I live in Canada?

Thanks

Michael

Link to comment
Share on other sites

If you pay duty for other things from the States then I would think yes. Why don't you give them a call or email them. Buy the best tools you can afford. To start you need a good pair of tweezers dumont are the best you can get which is what I always used and bergeon watchmakers screw drivers. 

Link to comment
Share on other sites

  • 2 weeks later...

Virtually all US and Canadian goods have traded without duty for decades until the recent inane tariff wars, but I believe its where its made that determines duty, not where you buy it so it can vary.

BUT..... no duty does not mean no cost.  You still have to pay HST  (VAT) and often have to pay crazy admin fees from the carrier.  That imo is an unsavory business practice - I mean you know you have to do it so bake it into the price rather than stand extortion like on the stoop demanding extra money.  UPS is particular bad, fees can be more than shipping.  Best is the post....if I can't get a US seller to send via USPS I usually don't bother (there is a way around it, have it drop shipped to a service and then they reship to you via USPS).

The other problem you get is some vendors insist they use  UPS or Fedex or something rather than the post.  This can turn $15 in shipping into $100.  I believe Frie falls into that catagory, they have some strange and hostile feeling shipping policy if I remember.

One of the best vendors in Canada is HW Perrin.  Not much of web site but they are really helpful and in my experience they have or will get anything you need.   That and kijiji, ebay (watch the shipping) and amazon.ca (check prices they are not necessarily lower!).   I've mostly built my shop by buying up estates over the years that have come up on the classifieds....but obviously that will depend on patience and locations

 

Edited by measuretwice
Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...
  • 3 weeks later...
On 3/17/2019 at 11:10 AM, measuretwice said:

Virtually all US and Canadian goods have traded without duty for decades until the recent inane tariff wars, but I believe its where its made that determines duty, not where you buy it so it can vary.

BUT..... no duty does not mean no cost.  You still have to pay HST  (VAT) and often have to pay crazy admin fees from the carrier.  That imo is an unsavory business practice - I mean you know you have to do it so bake it into the price rather than stand extortion like on the stoop demanding extra money.  UPS is particular bad, fees can be more than shipping.  Best is the post....if I can't get a US seller to send via USPS I usually don't bother (there is a way around it, have it drop shipped to a service and then they reship to you via USPS).

The other problem you get is some vendors insist they use  UPS or Fedex or something rather than the post.  This can turn $15 in shipping into $100.  I believe Frie falls into that catagory, they have some strange and hostile feeling shipping policy if I remember.

One of the best vendors in Canada is HW Perrin.  Not much of web site but they are really helpful and in my experience they have or will get anything you need.   That and kijiji, ebay (watch the shipping) and amazon.ca (check prices they are not necessarily lower!).   I've mostly built my shop by buying up estates over the years that have come up on the classifieds....but obviously that will depend on patience and locations

 

Just to add to your note about shipping.  You do have the option to self-clear, or basically to act as your own broker.  This allows you to order from UPS/FEDEX/DHL without getting completely hosed.  They SUPER hate it and they've always just done the paperwork for me for free instead of letting me self clear.  If you have a Canadian customs office nearby this would be a great option.

Tutorial:

http://trueler.com/2010/11/24/self-clear-shipment-cbsa-avoid-ups-brokerage-fee/

 

As a general rule though, I avoid UPS and FEDEX like the plague they are.  CanadaPost is a joyous place in comparison.

  • Like 1
Link to comment
Share on other sites

7 hours ago, Dpastl said:

They SUPER hate it

 

That'd be reason enough, revenge!  :) 

I've read about this before, and a drive out to say the airport (i'm in TO) isn't exactly free or enjoyable so I haven't yet acted on it.  What exactly is the sequence?  Do you somehow get an advanced shipping notice and tell them not to hold/not deliver, or do they show up at the door and you do/say what?

Edited by measuretwice
Link to comment
Share on other sites

On 5/10/2019 at 4:56 PM, measuretwice said:

That'd be reason enough, revenge!  :) 

I've read about this before, and a drive out to say the airport (i'm in TO) isn't exactly free or enjoyable so I haven't yet acted on it.  What exactly is the sequence?  Do you somehow get an advanced shipping notice and tell them not to hold/not deliver, or do they show up at the door and you do/say what?

Haha, well the tutorial goes through it in more detail.  Basically when they call you about clearing it you tell them you will self-clear. They then get confused, forget you said this, and so forth. You can also refuse the charges when they deliver if I remember correctly. 

I'm in Saskatoon, so the airport is probably MUCH closer to me than you. 

Link to comment
Share on other sites

13 minutes ago, Dpastl said:

Basically when they call you about clearing it you tell them you will self-clear

 

that's the part I was curious about, they call you?   I've only ever had them show up at the door with the package and their hand out.   So you send them away - do instruct at all, i.e. "I'm going to self clear this please hold at your warehouse"?  What do you get from them, document wise, at that point to start the self clear process?   How do you even know what warehouse (some use 3rd party logistics co's)?

I've read about self clearing but all seems devoid of the detail you'd need to give it try.

Edited by measuretwice
Link to comment
Share on other sites

23 hours ago, measuretwice said:

 

that's the part I was curious about, they call you?   I've only ever had them show up at the door with the package and their hand out.   So you send them away - do instruct at all, i.e. "I'm going to self clear this please hold at your warehouse"?  What do you get from them, document wise, at that point to start the self clear process?   How do you even know what warehouse (some use 3rd party logistics co's)?

I've read about self clearing but all seems devoid of the detail you'd need to give it try.

I remember them calling me, and they have done so with work shipments as well (we have our own company for doing brokerage at work). Here's the official procedure from the CBSA:

 

Quote

How to pay duties and taxes for imported goods

If you are planning to have future shipments sent to you by courier from outside Canada, you do have the option of refusing the accounting services offered by the company, choosing instead to clear the goods yourself through your local CBSA office. If you choose to do this, you will not incur any brokerage fees. The two options available to you are the following:

1. Prior to receiving your shipment, you can contact the courier company and inform them of your wish to self-clear any shipments that are addressed to you and on which brokerage fees are applicable. The company will explain their procedures to you.

2. As an alternative, when a casual shipment is delivered to you, you can refuse delivery and advise the courier company of your intention to self-clear directly with the CBSA. In this case, please ensure that you take note of the unique shipment identifier number on the package, as the shipment will be returned to the courier’s warehouse.

With both options, you will need to visit your local CBSA office and provide them with specific details, including the courier’s name, the unique shipment identifier number, a description of the goods and their value so that the CBSA can correctly assess the goods. This information is usually indicated on the shipment’s invoice, which will be provided to you by the courier company. When you have paid the applicable duties and/or taxes to the CBSA, you will be given an official receipt indicating that the goods have been accounted for. You will need to present this receipt to the courier’s warehouse where your shipment is stored, in order for the courier to release your shipment to you.

Thank you for contacting the CBSA.

Internet: www.cbsa-asfc.gc.ca (http://www.cbsa-asfc.gc.ca/)

Canada Border Services Agency

Ottawa, Ontario

K1A 0L8

Government of Canada – Gouvernement du Canada

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So here is the new base (v 2.1), I made it so that the base will fit over and swallow the stump of the hand pusher tool (or at least my clone of the tool), I also reduced the OD of the bottom skirt a little as it looked/felt a little large, here are a few pictures and the fake .pdf file which you need to convert to .zip once downloaded.   The cut-out seen on the below image on the bottom of the base should swallow the OD (40 mm, +0.1 mm tolerance) of the stump and the height of the stump 9.5mm (measured to 9.1mm, but rounded to 9.5mm) - let me know if this works for your tool.   Note, I think you may need to print supports for the new internal shelf created? Here is the fake .pdf for just the FreeCAD base file and 3mf files Modular Movement Holder.pdf Here is the fake pdf for complete set of the new base and ring FreeCAD/3mf files: Modular Movement Holder base and ring v 2.1.pdf
    • Hi Frank, you have dived headlong into the deep end. Hairspring work has to be the scariest thing a newbie has to tackle. Your hairspring appears to be bent and just putting it back into the regulator would not allow the balance to work properly. It might start oscillating but the performance would not be good. The proper thing to do is to unstud the hairspring, remove the hairspring from the balance, reinstall the hairspring on the stud carrier, reshape the endcurve and centre the collet to the balance jewel hole. This challenge would either make you or break you. Hope that you will be able to fix your watch. Welcome to the world of watchmaking.  Watch this video. It think it'll give you an idea of the task ahead. From your 1st photo, I think you have a etachron type stud. Let me see if I can find a video on how to remove it from the arm.
    • Have read of the Tech Sheet attached on the balance section page 12. It may be bent but until you reposition it back in the regulator pins you'll never know. Cheers CJ 4R35B_4R36A.pdf
    • Aloha All, My Seiko 4R35B movement stopped working today. Upon closer inspection, it looks like the balance spring came out of the regulator pin. This is my first time working on a balance. Any advice on how to get this spring repositioned (back to normal)? I'm pretty sure that while adjusting the beat error on this movement, I must have turned the stud (I didn't even know they turned), and the spring eventually fell out.  Will the spring go back to even spacing when it's back in the pin, or does it look bent? Thanks, Frank  
    • Good job, that band matches the watch perfectly.
×
×
  • Create New...