Jump to content

Hello from Germany

Recommended Posts

Hey Guys,

I just joined the world of hobby watchmaking from Germany. I got myself some basic equipment and now trying to do my first projects.

First project is a broken mainspring on a 100 year old Longines pocket watch

Kind regards


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • There's a lot of good info in this thread, just to chime in and stress that the hole really needs to be re-centered before proceeding. Often the wear is within the oil sink, and that is normally well centered, and you can use that as a visual guide. In your case the wear has gone outside the oil sink; ideally here I use a compass with a wide point and scriber tip and make a now concentric circle around the hole, then file up to that with a round file. Then ream to size for a bushing.    
    • I was simply trying to start a new thread so my questions didn’t get lost in the other persons post.  i don’t know what a Module is or why it needs replaced. I also don’t get what happened to the watch and why I can’t fix the issue. So I’m just looking for more explanation is all. 
    • Hi Have a look at the attached Technical Sheet for the VD53B This module is from the Seiko Epson factory SIIO,  The module complete is not expensive and sooner than purchase a new stem condider a replacement module which comes complete with stem 3546_Seiko VD53A, VD53B (1) (1).pdf
    • Yes! Thanks NickelSilver. Thats my solution. There is no threat and I thought I was missing parts. I will have to find a way of making an Eccentric cam, but now at least I understand how it works. Thanks a million guys!! Sent from my iPhone using Tapatalk
    • There are two principal ways the plate locks, either with a wedge and screw which pushed the wedge into the post in the plate like Watchweasol's (seems maybe that one just uses the screw but I suspect the screw is a replacement and the wedge has gone missing), or with an eccentric cam. The one Nsteyn needs an eccentric cam. It can be made if you have a lathe, you'll want a 4 jaw chuck to set the piece off center to make the eccentric part (can also shim it in a collet or 3 jaw chuck).   The pic is from a little Star I have, other Stars I have use a screw and wedge, so it's not even manufacturer specific.    
  • Create New...