Jump to content

Anybody Know


bjd1020

Recommended Posts

Helvetia, Société d'Horlogerie La Générale (General watch co) do your search around this information that shock absorber was patented by them in the 1920's.
Thanks. Any idea on a value? Its actually functioning.

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites

Is it in a gold case, if so what is the carat? It will also depend on its weight. 
Hey there ole Man. Hope all is well. It was in a solid silver case. Although im not so sure it was the origional. daf4b1a59837b6a25dcd2907f17b3eb0.jpg472e107689b241719eefaec64a212e89.jpgd4280a470eea8531fad0158f7c01e024.jpg

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites

I collect WWII watches and sometimes you come around a similar movement, Helvetia 82A.
This one seems more like it's past 1945.The Value is what someone is willing to pay for it.

  • Like 1
Link to comment
Share on other sites

I collect WWII watches and sometimes you come around a similar movement, Helvetia 82A.
This one seems more like it's past 1945.The Value is what someone is willing to pay for it.
Roger that. Thanks for the obviois economics lesson. I was more interested in the case when I purchased it for 85 bucks, then when I got it and was able to get a close look at the case I found it to be not so appealing but quickly fell in love with the movement.....not sure what plans Ill have for it.

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites

Did the movement and case come together?
The case looks like it has a pin set on the side..
It did. But like I said it look as if the case was worked by hand. The stem looks handmade as well. So im thinking its not origional.

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites

The case is a Francis Borgel waterproof case it looks too early for the movement, but it appears to have import marks on the inside of the case so you should be able to date the case from the date letter, I would put the case from 1910-1920 so too early for that movement.

  • Like 1
Link to comment
Share on other sites

Im not sure exactly what the rules are but if youre interested in it id be willimg to trade (not sell). I picked it up while shopping for cases for a more modern build. Im more into 60s and 70s era movements but also like the case work of the WWII era. Something about the movement though is appealing to me. The case is solid silver. Ill attach a few pics of the dial and crystal.c4fd60551bbdeb413d89a9db5308cf26.jpg960e65e799355cab81765c0d543f83ab.jpg

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites

  • 1 year later...
On 3/1/2019 at 3:39 PM, bjd1020 said:

It did. But like I said it look as if the case was worked by hand. The stem looks handmade as well. So im thinking its not origional.

Sent from my SM-G950U using Tapatalk
 

Hello there. I know I am resurrecting another old thread but I wanted to let you know that I am 99% sure your watch is original and all the bits go together, apart from the hands where at least one is wrong, as they are not a pair, and probably both (they were probably luminous originally).

As has been said the movement is a Helvetia 81-24, this movement was introduced in 1929 when Helvetia patented their new shock protection system. Helvetia is a brand I collect and have a site on, they only numbered the bridges of their movements for a short period around 1930.

The serial number on the case is a Helvetia one and also dates the case to 1930, this would make the hallmark date letter a 'Z' which it does appear to be. You can see the lugs of the case are of a later style more similar to a cushion watch than earlier Borgel trench watches.

Helvetia specialised in water and shock protected watches, their main importer to the UK was Robert Pringle and Sons of London. You can see the Robert Pringle and Sons import mark 'AGR' on the case (for Arthur George Rendell an employee of the company).

Periodically Robert Pringle and Sons published a catalogue and below as the final proof is a picture of your watch from the 1931 edition, note the case style is the same as your watch and different to earlier Borgel cases.

 863411953_Wilderness1931Borgel.jpg.03db92cc94ff2008c483ed0ea4935a41.jpg

Have a look at my site here https://www.helvetiahistory.co.uk/1930s-sports-watches for more info on Helvetia water and shock proof watches.

Thanks. Carl.

  • Thanks 1
Link to comment
Share on other sites

On 3/1/2019 at 3:39 AM, bjd1020 said:

 

Not sure if this is the right spot. But can anybody help identify this movement?3547e4f2c1669e4a6f8ae35452eb7dc7.jpg6d926aa7c2cda80af9e9bacf323ca6c9.jpg

 

Sent from my SM-G950U using Tapatalk

 

 

 

Also for your information here is another part of the page from the catalogue where they reference the movement in your watch, in particular the shock absorber.

59z0v90.jpg

Thanks.

Carl

Link to comment
Share on other sites

On 3/1/2019 at 5:37 PM, bjd1020 said:

Im not sure exactly what the rules are but if youre interested in it id be willimg to trade (not sell). I picked it up while shopping for cases for a more modern build. Im more into 60s and 70s era movements but also like the case work of the WWII era. Something about the movement though is appealing to me. The case is solid silver. Ill attach a few pics of the dial and crystal.c4fd60551bbdeb413d89a9db5308cf26.jpg960e65e799355cab81765c0d543f83ab.jpg

Sent from my SM-G950U using Tapatalk
 

And lastly here is a slightly earlier version.

Note earlier Helvetia serial number and hallmark dates it to 1928. Case shape is the same more cushion like one. Hands are the same as one of your so it looks like one of your could be correct. Sometimes luminous dials without luminous paint were used with non-luminous hands.

The movement is an earlier adapted FHF one as this is before the Cal 81 came out in 1929. Notice the "Patent Shock Absorber" and "3 Adjustments dot star dot" is the same.

hVZ8mEVl.jpg

ihdKRd1l.jpg

idMFXsrl.jpg

Thanks.

Carl

Link to comment
Share on other sites

  • 2 months later...
On 3/1/2019 at 5:18 PM, Nucejoe said:

Says adjusted in three position and rare and unique shock protection, if dial and hands are in good shape and the rest Genuine, I would seriously look into restoration.

 

 

 

 

 

Hello again. Just to let you guys know that as a collector of Helvetia watches I reached out to bjd1020 with an offer to buy this watch for restoration. I received it a couple of months ago and have been slowly getting it back to it's original condition.

I received the crown I needed today and here is the result:

20201029_135313.thumb.jpg.a77f0d9f2fea1d66f71192b7e9cd63c7.jpg

And with it's 13 away serial number brother I found while looking for parts for this one.

20201029_134717.thumb.jpg.9d6c0b53f53f73ea126014d7204b8461.jpg

Thanks. Carl.

Edited by Penfold
  • Like 3
  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi, guys I have a bit of a predicament and hopefully, somebody can advise. I'm working on a Roamer MST 521 where the movement is extracted from the crystal side. I'm now at the final hurdle where I need to replace the movement back into its case but I'm not sure of the correct procedure. I still need to fit the hands but that's where the problem lies. If I insert the winding stem to test the hands for correct alignment I will need to turn the movement over to release the stem again it's the spring-loaded type and needs a small bit of force to push down but with the hands fitted, I don't think I can do this on a cushion without causing some damage to the hands and that's the last thing I want to do, this watch has already been a love-hate relationship and I'm so close to boxing this one off which I'm counting as my first major project.  The other option is to case the movement then fit the hands and hope everything is okay. I've already broken the original winding stem but managed to find a replacement, the last one in stock, so I'm a bit reluctant to keep removing it. Any suggestions would be appreciated. 
    • I would go for the dearer spring. You won't need to remove the spring from the carrier ring and then use a mainspring winder to get it into the barrel, for a start. Also that spring is closer to the needed dimensions, especially the length. The length plays a part in the mainsprings strength. If you double the length you will half the force (strength) of the spring and vice-versa. A spring with 20 mm less length would be about 7% shorter, so technically would be 7% more strength, but I find halving this number is closer to real-world findings, so the spring would be about 3 to 4% more strength/force. On a mainspring that ideally kicks out 300 degrees of amplitude, a 3% increase in amplitude would be 309 degrees. Increasing or decreasing the length of the mainspring will affect the power reserve to a greater or lesser degree. It depends how much shorter or longer it is.
    • I recently bought this but not on ebay. I figured if I want something Japanese I better check Japanese auction sites since these don't seem to pop up on ebay. I paid 83 € plus shipping & taxes. I think it was pretty reasonable for a complete set in good condition.
    • Did you take the friction pinion off the large driving wheel and grease it? Although, now that I think about it, that shouldn't have any effect on the free running of the train if the friction pinion isn't interacting withe minute wheel/setting wheel...
    • I did in fact use Rodico to get the spring into general position and "hold" it there while I used a fine oiler to make subtle positional adjustments.
×
×
  • Create New...