Jump to content
  • Similar Content

    • By jakobvinkas
      Hello!
      Not sure if this is the right place for my question since I do not intend to do the repair myself. However I am wondering if anyone knows an approximate price of a tachymeter for the Omega 3520.50 day-date (tripple date).
      If anyone has any idea what a insert and the "repair" would cost at a watch shop, please let me know.
      Thanks in advance.
      Jakob

    • By east3rn
      Hello. 
      I am about to work on a Omega ladies automatic watch.
      I found out that the axis of the rotor is out of place and shakes up and down.
      What could be done in this situation?
      Thanks!

    • By arkobugg
      Cheers mates!!
      Had to get new winding stem to an Omega cal. 342 , beacuse not original crown.
      Got an replacement from Ronda, but does not fit.
      Tried to fit the stem yesterday, but Im not able to get in in right in the movment.   The original just go right in every time, but the new Ronda stem will not go properly in.   Are there anyone that have some ide why this not fit?   Can the notch in the stem where I have put red arrow have somthing todo with this??   Its slightly smaller on the Ronda stem...  se photo  

    • By arkobugg
      Cheers Mates!
       
      Working on a Omega Cal. 613, have done service, and watch performs well on the time-grapher, but when put dial and hand on, I can see that the
       
       
       
       
    • By Harmines
      Hello all
      i wonder if anyone could offer some advice. I have an Omega seamaster 1345 quartz day date. Working well. However it seems the date is stuck (as shown in pictures) i know the push button at the 4 o clock position is meant to filter through the date? However when pushed in nothing seems to happen. As a result of this the watch works fine but only up untill 11pm it doesnt turn over to midnight and therefor change the day or date. Minute hand works perfectly but it seems i have to change the hour position every morning.
      when i turn the crown, hour hand moves fune and after the 12 o clock position changes the day, but date does not moth along with it.
      anyone know how i can resolve this safely without removing too many parts of the movement? 
      Many thanks




  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

×
×
  • Create New...