Jump to content

IWC antique pocket watch rear cover VERY hard to open


Recommended Posts

I am NOT a pro, but I have this IWC Full Hunter 14K yellow gold antique pocket watch. Original Sav. cal. 53 gi- 19lig. H 5 movement dating from the year 1913 with a full hunter case and cuvette. I believe the watch size is 43.15mm. Approximate thickness about 12mm, approximate weight about 103 grams.

The face cover opens easily with the crown button and closes easily and snugly. The inside rear cover seems to be okay. BUT the outside rear cover (it seems to me) should open easily as well with your thumb nail in the little lip on the side. But it is VERY difficult to open and I have to use a small pry tool to get it open. When closing it seems to "snap" closed very snugly as well. I can't believe it could "bent". But I suppose if one were to accidentally bend the open cover toward the hinge?  Or could it be caused by the movement being put in another case perhaps? (serial numbers are: movement: 565271. Case number: 631039 +31457 and +55231). 

Does anyone have experience with this issue or what could cause this?

Thanks so much.

open lid 6.jpg

open gears 4.jpg

Link to comment
Share on other sites

That's a very nice pocket watch you have there.  I once had a rare IWC C56 Americaine, and it was very high grade.

It's odd that you're showing 3 different numbers from the case. Are those factory engraved into the front, back, and dust-cover? If so, it would seem to indicate that it could be a Franken-case. That said, it doesn't look like it in the images. It looks like both front and back have what are called Jurgensen lips, denoted by the little extra cover piece that travels up the pendant. If you have images of those serial numbers, it might help to determine something. That all said, the fact that the back is tight, may just be how that case is. Back when it was made, it was rare for people to really need to see the mechanism, or make adjustments. And the harder it is, the more effective it may be at keeping out dust. Cheers.

 

  • Like 2
Link to comment
Share on other sites

Yes thank you for your response. You may be very correct... the rear covers may simply fit very tightly as a safety feature. I see the movement number clearly stamped 565271 on the body. And the case number: 631039 stamped on the inside cover.
The other numbers (+31457 and +55231) are stamped on the movement body, appear to be original and are very difficult to see without magnification. Though I am not sure of their significance, I include them here to be as detailed as possible.
Link to comment
Share on other sites

I can't see where those numbers are on the movement. Sometimes there can be Swiss patent numbers on the plates, and are near by the word "Brevet", or a cross symbol. Both of those numbers refer to Swiss patent numbers attributed to the IWC. 31457 is for a crown-wheel design. 55231 is for a design relating to fastening the dial.

The more I look at the case, the more I believe that it is original to the movement. Jurgensen lip cases are generally on the heavy side, and are used for high quality movements. What does the outside of the case look like? Initials? Engine-turning (finely engraved cross-hatching)? I'm just curious. Beautiful watch.

  • Like 1
Link to comment
Share on other sites

Yes I would agree that the +31457 and +55231 which are so tiny as to be barely visible, are probably patent numbers. "Pat. Pend." would not be used in Europe I would imagine. There are no initials, engravings or design on the case or covers. As the watch is an estate heirloom, I feel certain it is completely original. I am considering offering it for sale. These are some other photos.

lead 1.jpg

open lid 5.jpg

open face 3.jpg

open face 2.jpg

side edge 8.jpg

IWC logo 9.jpg

front close 11.jpg

Link to comment
Share on other sites

It's a nice watch. The almost certainly original case does show a bit of expected wear, as if a watch has been worn, but looks pretty solid. There does look like the front cover has been "sprung" a little. The slightly larger gap between the cover and the case band seem to indicate that. Still, overall it's very nice, IMHO.

I believe the market is still pretty strong for early IWC watches. Good luck if you sell it. Cheers.

 

 

  • Like 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • that band is old as stated, there is a kit that pops up from time to time on selling sites for the repair of these type bands, some of this type are adjustable on a few links, one adjustable type allows you to align the round opening in the expansion slit [like yours] with the rivet to separate, but if yours won't come out then the rivet head is too big and will have to be done with some rivet removal and replacement, I suppose if you could make/optain the correct rivets that one could alter the said band, the tops/caps do lift off after raising the tabs....  
    • This is a watch from a friend who sent it to a neighborhood watchmaker for a battery change. It came back with the watch stem in a ziplock bag and the dial skewed 20°. The watchmaker told him that the stem was faulty and the watch cannot be repaired. I opened up the watch and found that one dial foot was broken off and still stuck in the movement, while the other was bent until it was flat against the dial. The stem could be inserted but it couldn't be pulled out to quickset and time adjusting positions. I did a full disassemble, cleaned and oiled the movement. But when it put in the battery, the second hand runs super fast. Like it gains 30 mins every hour. Any advice on fixing this problem? TIA.
    • I determined that the balance staff is rotating, not the roller table, so my second attempt at riveting was unsuccessful. I have ordered a new balance staff and will take measurements when it arrives. The balance staff i originally ordered (and now reordered) was specified as: Replacement balance staff: (A. Schild Caliber 984 1002 1021 1124 Original Balance Staff Part 723) so it should be correct. Measurements: (see pic below for terminology) xxxyy is a place holder until the new balance staff arrives. Lower pivot: Old - .08 mm New - xxxyy Lower pivot to balance seat: Old - 1.53 mm New - xxxyy Roller shoulder: Old - .42 mm New - xxxyy Hub: Old - xxxyy New - xxxyy Balance shoulder: Old - .86 mm New - xxxyy Collet shoulder: Old - .56 mm New - xxxyy Upper pivot: Old - broken New - xxxyy
    • Hello and welcome from Leeds.  We're here to help. 
    • I was just about to adk that, probably they have unnecessary waiting lists to make their watches appear more exclusive than they actually are.
×
×
  • Create New...