Jump to content

Purchasing a Single Jewel


Recommended Posts

I am repairing an old Elgin Pocket Watch and need to replace the 3rd wheel jewel. I have removed the old jewel and it measures .28 by 2.0mm. It is burnished in, and i have all the right tools to replace it in the plate. I need to know the best place to purchase a single jewel and not loose an arm and leg.

 

Sent from my GT-N5110 using Tapatalk

 

 

Link to comment
Share on other sites

If you can find a place that sells them cheaply let me know.

I just recently spent £10.95 to buy a pack of 3 jewels for a pocket watch I'm repairing, but they are friction fit not rubbed in.

I just recently purchased a lot of moment parts with one of the main reason being I can salvage the jewels to use for future repairs, in other movements.

  • Like 1
Link to comment
Share on other sites

If you can find a place that sells them cheaply let me know.
I just recently spent £10.95 to buy a pack of 3 jewels for a pocket watch I'm repairing, but they are friction fit not rubbed in.
I just recently purchased a lot of moment parts with one of the main reason being I can salvage the jewels to use for future repairs, in other movements.

I agree totally. Where are all those Seitz jewels NOS

Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
×
×
  • Create New...