Jump to content

Disastrous watermarks on Rolex dial?


Recommended Posts

Hi everyone,

Quite some time ago (a good few years) I was wearing my Rolex datejust 1601 in London in heavy rain and high humidity (obviously a British summer). Anyway I noticed that quite a lot of condensation appeared in my watch. I know I know I should have taken it to an horologist straight away but alas. Anyway I pulled out the crown hoping it would allow the moisture to escape. This seems to have worked however the dial is now covered in watermarks which I can only assume are calcium deposits. 

I have seen a thread on the forums where someone removed a small watermark gently using purified distilled water. As you can see in the photo these marks cover the whole of the sunburst dial. Do you think this might be the best way? Or perhaps an incredibly gentle solvent? Naturally I want to be incredibly gentle, especially as I would have to go over the printed text and around the tritium.

I have opened the watch up and taken a very tiny look at the movement and all seems fine - runs accurate and no sign of rust or displaced oils however do you think it's best just to send it in for a service and hope the watchmaker can fix the dial? 

Hold me and tell me everything will be okay.

IMG_20190130_004452.jpg

Link to comment
Share on other sites

I am affraid the moisture have already taken it's toll and all over the movement too.

I would have taken and do now, take the watch to service centers.  Moisture ruins lubricants. 

In general, as soon as the moisture appears, the dial should be dealt with. Placing the watch under direct sun light or expose to other very mild heat, also taking the movement out to submerge in lighter fluid and blow dry helps reduce the damage, before you urgently get the watch to service man.

There are some treatment to somewhat clean the dial. Depending on the value of the watch,  the job should be entrusted solely to professionals. Do not attepmt yourself.

Regards joe

 

 

 

  • Like 2
Link to comment
Share on other sites

The original problem will be because the crown seals need replacing. The fact that moisture has entered the watch it should really now be serviced before rust becomes an issue. The dial could be a problem, if it is calcium then distilled water and a cotton bud might work but only try in a small area first.

Link to comment
Share on other sites

Where are you based ?
UK ? EU ? Elsewhere ?
There's a great guy in France, atelier-horloger.fr (not a friend or relative), that could take care of that beauty.
No idea how much it could cost but you can ask him a quotation.

Envoyé de mon Moto G (5) Plus en utilisant Tapatalk

Link to comment
Share on other sites



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Getting back to the issue which is us guys repairing or just enjoying horological exploits. The big worry now is how sound is Cousins as company going forward. The of cost if this 8 year legal battle will be astronomical. Cut backs will happen noticed already how the Cousins catalogue is half its size this year. The main supplier going out of business will hit the UK horological community in a big way.    On the Brexit issue it was about a sovereign country being able to make its own laws and trade with any country in the world. I cannot see what was wrong with this. For those who wish to re join the cost would be very high indeed.
    • Yes, it's the same (old) song and it's getting worse & worse;  
    • 🤔 leaving the EU meant that UK was no longer part of the convention and have already been turned down an independent reapplication. I'm pretty sure courts have to be held in Switzerland in this case. There will be a lot more watches stashed away in draws  tbh, folk wont be able to afford to maintain them. Cheap watches will be bought and top end watches by folk with plenty of cash that can pay for service and repair. The expensive once in a lifetime gifts and everything else inbetween will be at the forgotton when they stop working. I know i was being a numpty, get used to it 😄 Anybody that knows will boycott them, but besides repairers who will know. Nope will never buy one, i made that decision as soon as i learnt about this. 
    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
×
×
  • Create New...