Jump to content

Pegging jewel holes

Lc130

By Lc130
in Tools & Equipment

 Share

Recommended Posts

oli WRT Addict

oli

Posted
Posted

As above, definitely use pegwood. I find that the quality of the pegwood makes a significant difference as well, some grades are easier to sharpen to a perfect shape. The indian orangewood sold by cousins, although a step up compared to toothpick, is not up to the job for small jewels found in watches. 

 

Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
Posted
As above, definitely use pegwood. I find that the quality of the pegwood makes a significant difference as well, some grades are easier to sharpen to a perfect shape. The indian orangewood sold by cousins, although a step up compared to toothpick, is not up to the job for small jewels found in watches. 
 

Amen. I’m on the lookout for a much better quality pegwood so if anyone cares to mention a source in the UK or Europe I’m all ears.


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
1 hour ago, Pip said:


Amen. I’m on the lookout for a much better quality pegwood so if anyone cares to mention a source in the UK or Europe I’m all ears.


Sent from my iPhone using Tapatalk

Anyone sourcing folks with a majic pegwood up to the job, would make a living by it.

I join hands with pip, Thank the lord for the pegwwod we are about to receive.Amen.:jig:

Link to comment
Share on other sites
  • 1 month later...
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
On 1/10/2019 at 12:44 AM, oli said:

As above, definitely use pegwood. I find that the quality of the pegwood makes a significant difference as well, some grades are easier to sharpen to a perfect shape. The indian orangewood sold by cousins, although a step up compared to toothpick, is not up to the job for small jewels found in watches. 

 

Is indian orangewood a label? brand name? Or tells  the wood is off of some type of indian orange tree. If so plenty orange trees in my front yard so all I need is a pencil shrapener:lol: .This is got to be the stupidest question ever on forum.

Link to comment
Share on other sites
JimmyD WRT Addict

JimmyD

Posted
Posted

BUY? being a Scot (now in Australia) why buy pegwood, just get a scrap bit of oak, ash, whatever as long as it is hardwood, use a tennon saw and cut it into about 1/4 inch squares, and chisle the end to the size you need. Failing that I have also reused Kabab stickes after a BBQ. :biggrin:

Link to comment
Share on other sites
  • 7 months later...
Klassiker Distinguished Member

Klassiker

Posted
Posted

Just took a look at the Cousins website. They have the Indian orangewood as mentioned by Oli above, the German orangewood he recommends, and swiss beech or hornbeam. All are at the affordable end of the scale. Then there's the luxury article from Horotec, which is described as Swiss gentian wood. I guess this is the sort which Nickelsilver praises above, in which case I assume the price is justified. I'm looking for something which will take a really fine, sharp but durable point, but still clean well.

Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
2 hours ago, Klassiker said:

Just took a look at the Cousins website. They have the Indian orangewood as mentioned by Oli above, the German orangewood he recommends, and swiss beech or hornbeam. All are at the affordable end of the scale. Then there's the luxury article from Horotec, which is described as Swiss gentian wood. I guess this is the sort which Nickelsilver praises above, in which case I assume the price is justified. I'm looking for something which will take a really fine, sharp but durable point, but still clean well.

Wouldn,t that be nice. 

Link to comment
Share on other sites
nickelsilver Distinguished Member

nickelsilver

Posted
Posted

The gentian wood would be really fragile, it's close to pithwood in consistency. Great for polishing bevels, not much else.

Regular pegwood is light years beyond toothpicks, the "normal" horotec i described above is a-ok for jewels down to say 0.07mm no problem. You should peg the pallet hole jewels if nothing else, a good 30-40 degrees of amplitude lie there!

  • Thanks 1
Link to comment
Share on other sites
anilv Distinguished Member

anilv

Posted
Posted

A bit of drift but still related to pegwood.

I have a table pencil-sharpener bolted to my desk. I use it to get a nice conical tip and then use a knife to get a fine point. If I hand shape the point I find I really need to focus on getting the tip central otherwise it wont spin concentric when you roll it between your fingers. Te sharpener does 95% of the work and I just contribute the last 5percent.

Note, while you may get by with a hand sharpener, the table type ones hold it  central better.

Anilv

  • Like 1
Link to comment
Share on other sites
eccentric59 WRT Addict

eccentric59

Posted
Posted (edited)

Try getting yourself a couple of mechanical drafting pencils and a sharpener. These can really put a fine point on pegwood as shown in the photo compared to your standard No. 2 pencil out of a desktop sharpener.

 

sharpener.thumb.jpg.49a5bddfbb81972d6d199761fc1e9100.jpgS20191103_0003.thumb.jpg.76a33e311b2158f993c53203317b1278.jpg

Edited by eccentric59
  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Yup watchie you are entirely on my wavelength with this , you actually said what i was hinting at, what if something happens to mark ? Will someone be able to take over ? Its not that long ago that the forum was down and Mark had to step in and fix it. And you are right a wealth of information that does not exist as a whole anywhere on the planet will be lost. Can that be archived elsewhere?
    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      Hopefully if the issue is running costs, Mark would let us know and suggest ways of raising finance. If it's the other issue, which we are skirting around, sites can be passed onto others.   PS because I know you're all interested, I  had a bacon and mushroom sandwich for breakfast.  Hehe. 
    • oldhippy
      Intro

      By oldhippy · Posted

      Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
    • watchweasol
      Intro

      By watchweasol · Posted

      Hello Nosh and welcome to the forum.   Enjoy
    • watchweasol
      Without Our Forum

      By watchweasol · Posted

      Hi guys, the question is what is a forum, a place for discussion and passing on information, idle chat and a bit of fun and I for one are the richer for it. When in Hospital last year with the Covid being force fed oxygen and feeling total sh1t and close to the pearly gates a daily look on the forum to see what was going down helped to keep me focused on the job in hand took my mind off the problem for a short while but it was a lifeline for sure. We chat to friends for that is what they become around the world read their posts help where we can post information where we can.  I like @Neverenoughwatches some times think of members past and wonder if they are still at the watches or given up, some drop in for advise and drop out again never to be heard of again. The forum reminds me of Yorkshire hospitality, The door is always open and the kettle on the stove. Long may it continue.   My two bobs worth.
×
×
  • Create New...