Jump to content

Regulating a 7750 with Etachron

Giuseppe

By Giuseppe
in Watch Repairs Help & Advice

 Share

Recommended Posts

Giuseppe Member

Giuseppe

Posted
Posted

I'm having some unexpected behaviour from a eta 7750 that I'm trying to regulate after servicing.

I went through service procedure using correct lubricants.
Everything went fine. Actually I have some doubt on lubrication of incabloc wich I'm not sure I did correctly since I'm afraid that too much oil was placed in one of the two stones.
The fact is that when I finished I wasn't brave enough to clean and lubricate it again ... shame on me but I felt that task to be very very difficult.

Anyway after reassembling the watch I had it at my wrist for a week and it showed a great consistency at -10 sec a day.
It'a stop grade movement and resting at night in DU, DD 9UP and 3UP positions always showed something between -14 -6

I was very happy with that result and I thought that a little regulation would have brought it to a very fine time keeping.

Then I reopened the caseback and slightly moved etachron arm, that was resting in a nearly neutral position, in the + direction.
Nothing happened (measuring with timegrapher open source app)

Did it again, another slight push.
Nothing

? ok I must have gone the wrong direction, then pushed all the way toward   - 
Nothing happened.

Ok this is annoying, all the way toward +
nothing

here I am, 
what I'm I missing?
How come moving the regulator arm from - to + does not make any variation?

I'm lost

Link to comment
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchweasol
      Without Our Forum

      By watchweasol · Posted

      Hi guys, the question is what is a forum, a place for discussion and passing on information, idle chat and a bit of fun and I for one are the richer for it. When in Hospital last year with the Covid being force fed oxygen and feeling total sh1t and close to the pearly gates a daily look on the forum to see what was going down helped to keep me focused on the job in hand took my mind off the problem for a short while but it was a lifeline for sure. We chat to friends for that is what they become around the world read their posts help where we can post information where we can.  I like @Neverenoughwatches some times think of members past and wonder if they are still at the watches or given up, some drop in for advise and drop out again never to be heard of again. The forum reminds me of Yorkshire hospitality, The door is always open and the kettle on the stove. Long may it continue.   My two bobs worth.
    • KenD
      Main spring

      By KenD · Posted

      Thanks all.   Movement is a Helvetia 800C. Don't know any history e.g. if the broken mainspring is original. Watch was bought recently as non-working. Really interesting piece that Jon, thanks. I'd only been thinking of length relating to power reserve. I don't have a mainspring winder (yet) so I'd like to avoid winding the spring into the barrel by hand. The old spring measures at 1.60 x .11 x ~290. Sorry, can't be exact on the length. The piece I still have is 275, but the second piece escaped during measurement. Best measurement I had for it was ~13. The micrometer does zero accurately so I'm pretty confident of the .11 Also, I'm getting the barrel ID at 9.5 on a vernier. I'm now wondering about going with a .11 spring? Given all of the above, maybe 1.60 x .11 x 300 x 9? Any thoughts? Cheers.
    • VWatchie
      Without Our Forum

      By VWatchie · Posted

      Funny that you should bring this up. I was thinking about it just the other day. What happens if something happens to @Mark? The social bit is fantastic and I would miss it dearly, but I worry even more about the content. Together we have created a gold mine of information which would be more or less irreplaceable if the site should disappear. People (often with a lot of knowledge) come and go. I sometimes wonder what happened to them and miss them. We have no idea unless we have some private contact information. When I was new here I saw a lot of posts by @Lawson. He had a true fire in his heart for horology and was asking for an apprenticeship in his signature. I found that very inspiring and often wondered what happened. Is the fire still burning? Did he get an apprenticeship?
    • clockboy
      Intro

      By clockboy · Posted

      Welcome to the forum, enjoy.
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      I dont like to give up things that i enjoy Tom.  So my next question is how are we going to prepare for that inevitability and what are we going to do about it. Its not just about funding it but I did pick up on something that Mark said once. It doesnt run on fresh air , what if it becomes a burden or an unnecessary cost or for any other reason that i wont get into. We all know life can change in an instant, my life has been so up and down for about 8 years and was only just beginning to level itself out. 
×
×
  • Create New...