Jump to content

Ingersoll sealion


Johnnie

Recommended Posts

Hi Johnnie and Hi alls

Today something came to me from Britain :) sent by a great member here and a real gentleman ... Johnnie.

Johnnie sent me not only an beautiful watch but a complete set with box and guarantee card ... incredible

So le's go to the unboxing pics

IMG_2011.thumb.JPG.90d082a837bd4573e01d5cb041637783.JPG

IMG_2012.thumb.JPG.6655490caa3dbcfe5e37ec4fd1c44ace.JPG

IMG_2013.thumb.JPG.10a49525deeb604e6c9a4204c4bcfcea.JPG

IMG_2014.thumb.JPG.09b8a0ba9caa6f14478abe4e018d1d28.JPG

I couldn't wait to see it ticking so I've set the day, the date and wound it ... and it ticks

So now it's up to me to take care of it ...

- redo some brushing and polish on the case

- polish the crystal

- find a nice strap to put on it

- build a custom new bezel + bezel insert

I'll do my best to make it look as if it was almost new then, of course, I'll enjoy wearing it.

Thank you again Johnnie ... I already love that oldie and I hope it will love the old man wearing it (I was 18 when you bought it)

 

So I will post here when all the work is finished but it could take weeks or months as making a custom bezel is not that easy.

Link to comment
Share on other sites

  • 1 month later...
On 3/12/2019 at 6:34 PM, Johnnie said:

:)

Hi Johnnie

Sorry for not posting anymore on that thread but the last past weeks my live have been a real mess (too much work).

But I have some good news about that nice Sealion B)

I have sourced a rotating bezel that should fit the case with just some little sanding !!! YES :biggrin:

I'll do that  next week or  the week after and post some pics when done.

Then  I'll have to finish the design of the insert (almost done), print it on a white decal, put it on and protect it with waterproof warnish ... I have found a brand that can be cooked in a kitchen oven and will perfectly do the job.

Link to comment
Share on other sites

  • 2 months later...

Hi Johnnie [emoji846]
Some good news about the SeaLion.
First is that I have put my hands on a bezel that will fit the case with very few rework.
Second is that I've tested the laser film-free decal method that Mark showed ... it works perfectly on polished metal and is crazy solid so it won't need any lacquer to protect it.
This summer I'll modify and polish the bezel, redo the printing design according to the final dimensions and put it on the bezel.
So now I'm 1000% certain I can achieve that repair [emoji16] ... life is good

Envoyé de mon moto g(7) power en utilisant Tapatalk

Link to comment
Share on other sites

1 hour ago, manodeoro said:

Hi Johnnie emoji846.png
Some good news about the SeaLion.
First is that I have put my hands on a bezel that will fit the case with very few rework.
Second is that I've tested the laser film-free decal method that Mark showed ... it works perfectly on polished metal and is crazy solid so it won't need any lacquer to protect it.
This summer I'll modify and polish the bezel, redo the printing design according to the final dimensions and put it on the bezel.
So now I'm 1000% certain I can achieve that repair emoji16.png ... life is good

Envoyé de mon moto g(7) power en utilisant Tapatalk
 

:Bravo: Manodeoro ! I am so pleased for you, I hope it brings you much pleasure. Wear it with my very best wishes:biggrin:

Link to comment
Share on other sites

  • 2 weeks later...
:Bravo: Manodeoro ! I am so pleased for you, I hope it brings you much pleasure. Wear it with my very best wishes[emoji3]
BINGO !!!
Johnnie, my friend, just look at this ...
The Ingersoll SeaLion has a bezel that fits perfectly and rotate smoothly.
I still have to remove the existing printing ... I'll use the Dremel as I've tried hand sanding without success
Then I'll print the design on a color laser printer and transfer the toner in my kitchen oven
So there is still some hours to spend on that beauty but the door is definitely open [emoji16] ...life is good and I love watchmaking

e320c122e5f73fb08647251ef4e5cceb.jpg

b844661bd9bddeb4491fe7bc504033f1.jpg

f279a48311abc9294ae9b2a1f1a98895.jpg

37447e41873779b6c9682865a949cc1c.jpg

Envoyé de mon moto g(7) power en utilisant Tapatalk

Link to comment
Share on other sites

Hi Manodeoro, :woohoo-jumping-smiley-emoticon::Bravo: The sealion looks superb, well done, you have made an excellent job of making and replacing the missing bezel. I hope it brings you much pleasure my friend :biggrin:

  • Thanks 1
Link to comment
Share on other sites

1 hour ago, Johnnie said:

Hi Manodeoro, :woohoo-jumping-smiley-emoticon::Bravo: The sealion looks superb, well done, you have made an excellent job of making and replacing the missing bezel. I hope it brings you much pleasure my friend :biggrin:

Thanks :)Now I'm strugling to design the toner transfer :wacko: as the bezel is only 4.8mm large ... 

I still have a lot of hours tp spend on that but it's 1000% worthy :wub:

I just hope the laser printer will be able to print those 1.4mm letters and 1.2mm numbers :biggrin:

454527490_INSERTV1.thumb.jpg.fc86cc8d8785d92c79fbc90cd22185ec.jpg

  • Like 2
Link to comment
Share on other sites

On 7/10/2019 at 6:49 PM, manodeoro said:

BINGO !!!
Johnnie, my friend, just look at this ...
The Ingersoll SeaLion has a bezel that fits perfectly and rotate smoothly.
I still have to remove the existing printing ... I'll use the Dremel as I've tried hand sanding without success
Then I'll print the design on a color laser printer and transfer the toner in my kitchen oven
So there is still some hours to spend on that beauty but the door is definitely open emoji16.png ...life is good and I love watchmaking

e320c122e5f73fb08647251ef4e5cceb.jpg

b844661bd9bddeb4491fe7bc504033f1.jpg

f279a48311abc9294ae9b2a1f1a98895.jpg

37447e41873779b6c9682865a949cc1c.jpg

Envoyé de mon moto g(7) power en utilisant Tapatalk
 

Hi Manodeoro, all I can do is wish you all the best ! :biggrin:

 

 

 

Link to comment
Share on other sites

  • 5 months later...

Hi Johnnie,

I've been off of watmaking for a few months because if personal problems but I'm back here ... so I just want you to see something that could be nice ...
I still need to find a way to have no parts of the printing missing but it seems I'm on the right way to get a bezel back on the Sealion [emoji6]

01039fa6bc3c56551415ccbd1a5fbf68.jpg

Envoyé de mon moto g(7) power en utilisant Tapatalk

Link to comment
Share on other sites

58 minutes ago, manodeoro said:

Hi Johnnie,

I've been off of watmaking for a few months because if personal problems but I'm back here ... so I just want you to see something that could be nice ...
I still need to find a way to have no parts of the printing missing but it seems I'm on the right way to get a bezel back on the Sealion emoji6.png

01039fa6bc3c56551415ccbd1a5fbf68.jpg

Envoyé de mon moto g(7) power en utilisant Tapatalk
 

Hi Manodeoro, you are nearly there ! :woohoo-jumping-smiley-emoticon:

Link to comment
Share on other sites

  • 4 months later...
Thinking about it, with bits of print missing it looks quite genuine [emoji3]
Hi Johnnie ... Hope you and you family are OK and have not been infected by Covid-19 ...
I just wanted to show you what finally on my wrist ...

949e3186b239b2200197938dcdd72a36.jpg

Envoyé de mon moto g(7) power en utilisant Tapatalk

  • Thanks 1
Link to comment
Share on other sites

Hi Manodeoro[emoji3] Well done ! I am so pleased how it turned out, I hope you wear it in good health.:Bravo:
Hi Johnnie ... I definitely love that watch and will wear it a lot, in good health and proudly ...
It's ben a long and challenging journey to put it on my wrist but 1000% worthy ...
Thanks again [emoji106]

Envoyé de mon moto g(7) power en utilisant Tapatalk

Link to comment
Share on other sites




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
    • Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
×
×
  • Create New...