Jump to content

Anyone recognise this lathe type? 65mm centre to bed?


Vacherin

Recommended Posts

It takes W20 20mm Schaublin collets, and has no makers name on it. LA346 seems to be a part number, other castings have sequential numbers. It is extremely heavy for it's size and is very well made. Bronze nuts on the slides, roller bearings on all rotating parts inc tail stock.

 

 

 

 

 

 

 

 

IMG_20181214_143728.thumb.jpg.13ca67652df3890857d5eb647b7ac66e.jpgIMG_20181214_134351.thumb.jpg.bdff6763e049fff0a649d36b8b677c35.jpg

IMG_20181214_134317.jpg

Link to comment
Share on other sites

It's an oddball, for sure. I'm guessing you found this in Switzerland (looks like Swiss workshop color and window there!); it wasn't uncommon for machinists to make simple machines like this from base castings as part of their schooling some years ago. It's probably a quite good machine and w-20 collets and tooling are plentiful , much easier to find than what one would imagine for this size machine, w-12. It's odd they chose 65mm as the center height, and it makes it hard to adapt Schaublin 70 slides and whatnot, though Schaublin did make a 65mm machine as well. One thing for sure, it's not Schaublin.

  • Like 1
Link to comment
Share on other sites

The Base castings theory is a good one. It doesn't have markings on any parts, apart from someone's initials, AG which appear all over the place. The slide is very nice thankfully, and it is all nice and tight. It came from a house clearance in Switzerland. I already have some W-20 collets from my Schaublin 102 which I bought dismantled. Anything with a decent slide on it fetches a small fortune, apart from this thankfully.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...