Jump to content

Cap jewel


AP1875

Recommended Posts

Working on a 2892-2 yesterday and I sent the balance lower cap jewel into orbit. :pulling-hair-out:

I have two options and I'm struggling with both due to lack of knowledge.

1) Buy a new Seitz jewel and fit - When on the cousins website https://www.cousinsuk.com/category/jewels-seitz all the cap jewels bar one type are obsolete am I looking at the correct section? Can anyone tell me what size jewel is used in the lower block, I would measure the top but ive heard they're different sizes.

 

2) buy a new lower block and remove the cap jewel, is this one correct, shows as 2892a2, assuming they're the same?

Thanks for any help

Screenshot 2018-12-07 at 16.22.28.png

Link to comment
Share on other sites

PS. My technique for finding lost parts launched into oblivion is to empty out my little Dyson vacuum, vacuum the area, tip out contents onto a large white surface like a dinner plate and search through with fingers. If it's metal (obviously not much use in this case) a strong magnet is useful as well (but be sure to demagnetise the piece if you find it). It's a dirty job but where there's muck there's luck.

Edited by margolisd
  • Like 1
Link to comment
Share on other sites

Give Gleaves a call https://gleave.london 
They are on WhatsApp if you use it 0207 253 1345
 
 


That site is really good, fair play to them for taking pictures of every part. I will definitely use them when possible.

I found these on cousins by chance so I’m feeling relieved

ad463011d4301edea79454475d11252b.jpg

I also ordered a container of the mixed jewels as suggested so thanks..


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

PS. My technique for finding lost parts launched into oblivion is to empty out my little Dyson vacuum, vacuum the area, tip out contents onto a large white surface like a dinner plate and search through with fingers. If it's metal (obviously not much use in this case) a strong magnet is useful as well (but be sure to demagnetise the piece if you find it). It's a dirty job but where there's muck there's luck.


That’s a great tip, I’m going to buy a little Vac to do the same! I already have an LED lamp setup under the desk and I’ve been quite successful. I think confidence has gotten the better of me, before this week it’s been a while since I’ve lost any parts. Mainly due to buying decent tweezers I think


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

On 12/7/2018 at 11:52 AM, margolisd said:

PS. My technique for finding lost parts launched into oblivion is to empty out my little Dyson vacuum, vacuum the area, tip out contents onto a large white surface like a dinner plate and search through with fingers. If it's metal (obviously not much use in this case) a strong magnet is useful as well (but be sure to demagnetise the piece if you find it). It's a dirty job but where there's muck there's luck.

Mine as well.  The vacuum has saved me many times.  The magnet a few as well.


RMD

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...