Jump to content

Stem release not working


ensoWR

Recommended Posts

Dear friends,

Very eager to service my Zenith 2572c, but I am stuck with a very silly issue of non-working stem release button.

It appears to be a simple push to release type, but it doesn't release the stem when the pressure is applied.

What could be the possible solutions? Getting to the keyless works would be brilliant, but I can't reach it without removing the bloody stem.

Thank you kindly.

e6fcd60e474d6cc6a08a0abda8bd469a.jpg

Link to comment
Share on other sites

Sounds like you've already tried the correct approach but humour me and, pull the stem/crown out to its outer (time changing position). Now applying constant moderate pulling pressure on the crown (perhaps with the thumb and third finger of your right hand) depress the stem release button with a suitable tool held in your left hand.

If this doesn't work them remove the movement retaining ring (two screws hold it in place at 12 and just after 6 o'clock positions in your photo) as this will give the movement a little more freedom in case there is unexpected resistance on the stem that is causing an issue; repeat the above.

Still no luck? You've little choice but to remove the barrel bridge so you can get an indication of what's going on underneath it and get a glimpse of the stem release button and keyless works. This is straightforward though. You should already have ensured the mainspring is wound down after which this is just a case of taking off the two wheels atop the bridge (crown and ratchet) and the three screws that hold the bridge in place. Now you can remove the bridge and see what's going on:

image.png.7b9d4c37c8526b33778ae92bd0e5134c.png

Let us know how you get on!

Edited by WatchMaker
  • Like 2
Link to comment
Share on other sites

I take this gorgeous creature to a zenith master with no less than thirty years experience and gladly pay the expenses. You will still have plenty money left to buy a regular watch to work on. This way you got better chance of showing off the gorgeous on the forum and lets enjoy watching it. Rather than asking this:hair: guy to express your regret.

Good luck pal.

Link to comment
Share on other sites

17 hours ago, WatchMaker said:

Sounds like you've already tried the correct approach but humour me and, pull the stem/crown out to its outer (time changing position). Now applying constant moderate pulling pressure on the crown (perhaps with the thumb and third finger of your right hand) depress the stem release button with a suitable tool held in your left hand.

If this doesn't work them remove the movement retaining ring (two screws hold it in place at 12 and just after 6 o'clock positions in your photo) as this will give the movement a little more freedom in case there is unexpected resistance on the stem that is causing an issue; repeat the above.

Still no luck? You've little choice but to remove the barrel bridge so you can get an indication of what's going on underneath it and get a glimpse of the stem release button and keyless works. This is straightforward though. You should already have ensured the mainspring is wound down after which this is just a case of taking off the two wheels atop the bridge (crown and ratchet) and the three screws that hold the bridge in place. Now you can remove the bridge and see what's going on:

image.png.7b9d4c37c8526b33778ae92bd0e5134c.png

Let us know how you get on!

Appreciate the detailed and valuable advice, Sir. 

In the end, after taking off the barrel bridge I found the stem release mechanism to be damaged. Managed to reach it at the side of the stem and the stem/crown were released.

A pleasure to resolve the issue, but the search for the part begins.

 

Thank you for all who tuned in!

Link to comment
Share on other sites

14 hours ago, Nucejoe said:

I take this gorgeous creature to a zenith master with no less than thirty years experience and gladly pay the expenses. You will still have plenty money left to buy a regular watch to work on. This way you got better chance of showing off the gorgeous on the forum and lets enjoy watching it. Rather than asking this:hair: guy to express your regret.

Good luck pal.

I didn't start this hobby to give up on a challenge, although I am sure I will pay a dear price some day. Thanks for advice.

  • Thanks 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
    • Isn't that the same guy who told Zelenskyy to escalate the war with Russia/Putin when they already had a peace deal? 2 years later and we have half a million young Ukranian boys dead. He doesn't seem very clever...
    • Thanks guys.  quick question. For automatic movement, particularly this one. can I power down the main spring by pushing this rachet down?  i've gotten pretty used to SW210 and powering down a manual movement. But so far i've only been waiting for the auto movement to run out of juice before opening the case.     
    • @Murks the problem you have mate is most watch cases out there to buy are for Seiko NH3X, ETA 2824 and maybe Myota 8XXX movements, oh also the big ETA 6978/9 movements which the dials start around 28.5mm. You might find one on a Google search but I suspect your main chance will be buying cheap quartz ladies watches and hopefully find one of the right size and condition that is acceptable. 😞   Tom
    • The anchor pin should be perpendicular when the anchor is sat on a flat surface and if you post a close up picture of the backplate I will be able to tell you the correct torsion spring , running fast or slow is usually wrong Torsion spring. Here is a video from my YouTube channel showing how I set the beat  
×
×
  • Create New...