-
Recently Browsing
No registered users viewing this page.
-
Topics
-
-
Posts
-
Always nice if you give us a background story? Did you purchase the watch new with the instructions coming with that watch? Then I have a link where it explains what a Seiko five Is. Notice it does not define a specific caliber so conceivably the setting instructions may be different. On some of the Seiko is pushing in the crown should advance the day date but others you may pull it out to the position in between the setting and in and it should change the day date the same as basically any other watch. Then it would be helpful to give us the model number of the movement you'll find that number on the back of the case https://www.seikowatches.com/global-en/products/5sports/about -
By kendallronin · Posted
Hello everyone, got a question. I just purchased a Seiko 5, and trying to set day and time. I've followed the instructions, but I can't push in on crown to quick change the date and day. Or all Seiko 5 push to set? -
I had ordered a Omega 960 (based on 6497) and when I got it, the hour wheel is there but they don't have dial screws. I had to source some Omega screws for a lot of dough 😞 I contacted the seller but he said he doesn't know at all and just sell NOS movements. Luckily, many parts can be found using 6497 as keyword and they are interchargeable. -
-
I was thinking of drilling it but wanted to get this job done. Next time perhaps. I also put a video on YouTube , reassembling the Ball Waltham made watch and putting in the setting screws. Big success with the jewel setting and the resulting amplitude and beat error of the movement. Next job is soldering dial feet:)
-
Question
JCStuyck 0
Hi,
I am trying t upgrade my SKX009 with a sapphire double dome.
I brought a Crystal time 37 BAR. I do have a press.
I did remove the original glass without difficulty. BUT! I am trying to insert the new crystal sapphire in place but it seems that it doesn't get in straight.
I did put the chapter in the right place and the o'ing back in place before positioning the new crystal.
I am afraid to push to hard to get it in place .
Do you have any advice.
many thanks in advance.
J-C
Link to post
Share on other sites
2 answers to this question
Recommended Posts