Jump to content

cartier cal 83 movement needed


quantieme

Recommended Posts

They are expensive and hard to get the base caliber is a Frederic Piguet Cal.8310 they are used by Cartier and Ebel watches some parts are available check the wholesale suppliers, whole movements can be found on Ebay but are very expensive.

Link to comment
Share on other sites

Sadly its the way of the world, I think the parts are more readily available at U.S wholesalers but complete movements are like rocking horse droppings, I wouldn't buy a Cartier my self, but my partner wanted a Tank watch so I bought her a 1960's manual wind one at least I know I can service and find parts for it, but the modern quartz ones I would give a wide berth, considering Cartier charge £340.00 pounds to service a basic quartz movement.

Link to comment
Share on other sites

Thanks for the replies, I had tried cousins but as you say they are restricted, there was a chap on eBay but he has sold his last one (£230) l am pretty sure the problem with the one I have is a broken centre jewel as I took it apart to have a look and it was a bugger to get back together with that magnetic rotor and the wheels being all under one plate. The eBay seller says he might get another in a few months so my customer is happy to wait.

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • It's pronounced "bombay" like the city.  French for bomb is, 😄, bombe, pronounced the same as in English. Bombé, bombe.
    • That's a really good idea! I have a 3d printer, I think I'll design something that I can clip on to the edge of my desk to do the same. Thanks for the idea. 
    • I looked up bombè, domed in French.  It's pronunciation is bomb, does a bomb (explosive device) get It's name from bombè? I know we're going off subject but it's interesting. 
    • Okay, I checked with the fine folks at the McCaw Company, and they agree it's the correct crystal, and they have one in stock, so with that sorted time to get onto assembly. Starting by getting the spring into the barrel, which was a bit harrowing. It took me several tries to get it hooked onto my worn old winder arbor, but I did find a new use for the micrometer stand I just purchased. Carefully dabbed some Kluber P125 braking grease to the left of the divots around the barrel, and a little HP1300 on the floor of the barrel before popping it in--in case you haven't seen it, this is a great illustration I found somewhere on this site. You're not the boss of me, Bulova.   2172_Bulova 11AOAC 11AOACD 11AOACB.pdf Bulova_11 AOAC, D, B(1).pdf I got the train back in and it didn't seem as free as I'd like. Looks like the driving wheel with cannon pinion has zero end shake. That could explain the low amplitutde I started with. Now if you were me, would you push on the plate jewel or the bridge jewel? I've attached some extra pictures in case anyone sees something else I'm doing wrong here.
    • I have quite a few watch brands from all over the world. For some reason this Timex electric from 1979 is capturing my attention this week. I am not a particularly fond of battery operated watches or Timex, but this one is different for some reason. Post your watch in your collection that seems to draw you in more now than before...
×
×
  • Create New...