Jump to content

Greetings from Sunny Arizona USA


barkerka

Recommended Posts

Hello there and greetings from sunny Arizona USA!   I am very new to this hobby/sport and new to the Forum, but I am keen to learn..  Mark has inspired me with his excellent videos.  

I have a craving for historic military items, I mainly collect to keep the history alive and enjoy the hunt for missing parts and pieces.  In my search for various military items I have come across several old watches from the Great War and WWII which I have gathered in hopes of getting them back in service.  After paying a fortune to have one repaired and cleaned only to have it stop running I vowed to learn how to do it myself to save on future heartache.  Please have patience with me while I bumble my way along with newbie questions.....

 

   

Link to comment
Share on other sites

Thanks for the warm welcome everyone, I look forward to posting a few pictures and getting some expert advise ...  In the cigar box a few trench watches with shrapnel guards, several A-ll types, Bulova, Waltham, Elgin, and Hamilton, and a couple of 7 jewel type...

I have started buying a few tools for beginners, but I have yet to find full diagrams for parts and where to get said parts. 

I must say I am a little nervous about tearing into these old fellas.   I have no issue with ripping into and rebuilding an antique transmission but for some reason I am terrified of the those little screws..  :) 

Thanks again!

Link to comment
Share on other sites

A  watch is not unlike a transmission. it's just gear reduction and multiple  output shafts an engine that drive it , the mainspring  and a governor the hairspring.you need proper sized screw drivers, a movement holder and magnification to get you started.

Link to comment
Share on other sites

And if you like military watches, particularly American military watches, google:

TM 9-1575

It's the US Army technical manual for wristwatches, pocket watches, stopwatches, and clocks.  Long out of print, a PDF is readily available on the internet. 

It is written in the terse, clipped, formal "MilSpeak" you'd expect from an Army technical manual.  If you can get past that then I'd say it is, without a doubt, one of the best resources for learning how to inspect, troubleshoot, and repair watches.  It was the first book I read that showed how to interpret the results of a timing machine test.  So far only one other book in my (limited but growing) book collection touches on that.

And you can't beat the price.

Link to comment
Share on other sites

Great reference phydaux thank you - I was able to find a copy in reasonably good condition on Ebay..  It looks like it will have part numbers and parts /assembly diagrams.  For me knowing what to order is half of the battle, the other half is knowing where to find the replacement parts.  But just like my old Willys jeeps, the good parts suppliers slowly get discovered.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • that band is old as stated, there is a kit that pops up from time to time on selling sites for the repair of these type bands, some of this type are adjustable on a few links, one adjustable type allows you to align the round opening in the expansion slit [like yours] with the rivet to separate, but if yours won't come out then the rivet head is too big and will have to be done with some rivet removal and replacement, I suppose if you could make/optain the correct rivets that one could alter the said band, the tops/caps do lift off after raising the tabs....  
    • This is a watch from a friend who sent it to a neighborhood watchmaker for a battery change. It came back with the watch stem in a ziplock bag and the dial skewed 20°. The watchmaker told him that the stem was faulty and the watch cannot be repaired. I opened up the watch and found that one dial foot was broken off and still stuck in the movement, while the other was bent until it was flat against the dial. The stem could be inserted but it couldn't be pulled out to quickset and time adjusting positions. I did a full disassemble, cleaned and oiled the movement. But when it put in the battery, the second hand runs super fast. Like it gains 30 mins every hour. Any advice on fixing this problem? TIA.
    • I determined that the balance staff is rotating, not the roller table, so my second attempt at riveting was unsuccessful. I have ordered a new balance staff and will take measurements when it arrives. The balance staff i originally ordered (and now reordered) was specified as: Replacement balance staff: (A. Schild Caliber 984 1002 1021 1124 Original Balance Staff Part 723) so it should be correct. Measurements: (see pic below for terminology) xxxyy is a place holder until the new balance staff arrives. Lower pivot: Old - .08 mm New - xxxyy Lower pivot to balance seat: Old - 1.53 mm New - xxxyy Roller shoulder: Old - .42 mm New - xxxyy Hub: Old - xxxyy New - xxxyy Balance shoulder: Old - .86 mm New - xxxyy Collet shoulder: Old - .56 mm New - xxxyy Upper pivot: Old - broken New - xxxyy
    • Hello and welcome from Leeds.  We're here to help. 
    • I was just about to adk that, probably they have unnecessary waiting lists to make their watches appear more exclusive than they actually are.
×
×
  • Create New...