Jump to content

Have you had success with dial dots?


phydaux

Recommended Posts

For my first build I want to turn a 6497 movement into a pocket watch.  I've sourced all the parts, but I can't find a pocket watch dial for the 6497 movement.  That means the watch I end up with will be a sidewinder.  

Then I was doing some reading and was introduced to the idea of Dial Dots.  I could use the dial I want to use, cut off the dial feat, and adhere the dial to the movement with dial dots.  Far better than the Gorilla Glue stories I see on here so often.

Has anyone used Dial Dots before, and have you had good success?

Link to comment
Share on other sites

I have used them many years ago. Just make sure you place the dial right in the center of the hour wheel and cannon pinion. With a skeleton movement you need to find a good place so the dots do not interfere with the working movement. 

Link to comment
Share on other sites

I have used them once. I had  quartz watch which has a hologram on the glass which I bought in the late 1990s.

I found it a year ago and the cheap quartz movement in it no longer ticked so I bought a replacement movement and when I pulled the watch apart discovered the dial had no dial feet and had been held on with dial dots.

I fitted new dial dots and it has been fine. Not to mention the old dial dots held the dial in place with no issues for 20 years.

They would be my last resort, but if applied properly they do work.

Good luck with your project.

Link to comment
Share on other sites

7 hours ago, rogart63 said:

There is a few dials for the unitas 6497 but not in the style you are after? 

All the dials for 6497 that I have been able to find have the stem at 3 and the second hand at 9.  That's fine for a "sidewinder" pocket watch, but historically sidewinders had hunter cases, and I want an open face with a display back, and usually those were made with the stem at 12.

If I put a 6498 dial on a 6497 movement than it would have the stem at 12 and the minute hand at 6, which is what I want.  But the dial feet wouldn't line up.  So I'm thinking I could clip off the dial feet and use dial dots.  If you look at the movement above it looks like the holes for the dial feet are at 3-ish and 6-ish.  There also looks like another nice spot at 9-ish.

Although I'm thinking that, if I use the case from above, I might be better off going with no dial at all.  I ALSO think I'd be better off with a gold skeletonized & engraved movement.  And some nice black hands.

Link to comment
Share on other sites

  • 4 weeks later...

Hi

 

I use double sided tape that I cut to the shape needed for the particular application. It is strong enough to hold down a dial but with the tape cut into thin strips it allows for easy removal of the dial again when required thus avoiding damaging the dial.

 

Hope this helps.

Andy

Link to comment
Share on other sites

  • 2 weeks later...


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
×
×
  • Create New...