Jump to content

Smiths 27.CS Info & Advice


jaycey

Recommended Posts

Evening chaps,

 

3/4's of the way through servicing a Smiths 27.CS with date & hacking and I have realised I didn't pay attention to the hacking mechanism during assemble and now I have no idea how it operates??

I can't see what interacts with the hacking assembly to move it forwards and backwards to engage with the balance wheel (which it is doing perfectly)

 

Also, does the return bar spring push against the tab for the hacking lever or hook behind it? Picture below.

 

IMG_0701.jpg

Link to comment
Share on other sites

Oh! Now I see. You were just resting the return bar spring on the setting lever while trying to figure out how it interacts with the hacking lever. At first glance I thought you placed it on the setting lever pin rather than below the return bar. I now understand the problem. I guess my pictures won't help at all because they don't show the interaction of the return bar spring and the hacking lever. 

Link to comment
Share on other sites

Thanks for taking the time to reply John.

Indeed, just resting the spring there before assembly.
Yes, just need to know the orientation of the spring with the hacking tab & what is actuating the hacking lever under the mainplate as it is moving correctly even without the return bar spring in-place.

Thanks


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

  • 2 weeks later...
On 11/15/2018 at 8:04 PM, jaycey said:

Thanks for taking the time to reply John.

Indeed, just resting the spring there before assembly.
Yes, just need to know the orientation of the spring with the hacking tab & what is actuating the hacking lever under the mainplate as it is moving correctly even without the return bar spring in-place.

Thanks


Sent from my iPhone using Tapatalk

The tail of the hacking lever needs to be compressed against the main plate, just as you show in your photo. It is easy for the spring to ride up over the hacking lever, so you must carefully insert it. You may find that it still rides up, but the cover plate will help to push it downward. There is a semicircular rebate where the spring sits which is stll accessible with a screwdriver once the cover plate is going down, in case you need to adjust the spring position. You may need to adjust the hack lever position by bending once assembled.

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...