Jump to content

Need 7s26C First reduction wheel


Recommended Posts

Hi All

I put my watch repair hobby on hold for awhile, but I am back at it.

Apparently I am a little rusty. While installing first reduction wheel clip I fumble and everything when flying...Believe or not I found the clip but can't find the wheel.

Would anyone have an extra 7s26C First reduction wheel Part number 051 006. I can find Part number 0511 006 But I am pretty sure that is for A&B models.Thats what Seiko spec sheet is showing anyway.

Thanks

Anthony

Edited by adiorio110
Link to comment
Share on other sites

  • 3 weeks later...

Well I found reduction wheel ... And then I lost shock absorbing spring for upper balance jewel ...believe it or not I found that also and that is one small piece ... I am a little rusty but my part finding abilities are still great... I have almost a 100% success rate lol

  • Like 1
Link to comment
Share on other sites

On 11/14/2018 at 1:15 AM, adiorio110 said:

Well I found reduction wheel ... And then I lost shock absorbing spring for upper balance jewel ...believe it or not I found that also and that is one small piece ... I am a little rusty but my part finding abilities are still great... I have almost a 100% success rate lol

Whow....  that is good finding that shock absorbing spring. That is small..... great work.  

Greetings from Norway...

Link to comment
Share on other sites

  • 1 month later...

Good for you!  I lost a teeny, tiny screw from the keyless work on a Wittnauer movement yesterday.  Spent thirty minutes on my hands and knees with the magnet.  Didn't find the screw, but I found a sliding pinion I didn't know I had lost.  Teeny, tiny screw from and Elgin movement fixed the Wittnauer.

 

RMD

Edited by rduckwor
Link to comment
Share on other sites

58 minutes ago, rduckwor said:

Good for you!  I lost a teeny, tiny screw from the keyless work on a Wittnauer movement yesterday.  Spent thirty minutes on my hands and knees with the magnet.  Didn't find the screw, but I found a sliding pinion I didn't know I had lost.  Teeny, tiny screw from and Elgin movement fixed the Wittnauer.

 

RMD

I also found a different part than I was looking for, But I already purchased a spare so I put that in the lost column. I am a hard grader.

I have worked on a bunch of pocket watches and moved on to wrist watch movements I torn down a simple gruen I think it was 518ca and also a Seiko 7s26c.. I am looking for something a little more challenging that will not break the bank. Anyone have any suggestions. 

Thanks 

Anthony

 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
    • Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
×
×
  • Create New...