Search the Community

Hello to everyone! My first post ever here! I would like to kick off by saying I’m glad I’m here and I have been watching YouTube videos made by WatchRepair! My name is Stan and I’m trying to get in watch repairs and would love to build my own shop to do this as my life business! And I started by going in to Rolex so I bought an post car crash totally destroyed Rolex submariner 2022 126610LN case was bend and cracked, crystal was smashed glass on inside date wheel and dial which was beyond repair missing hands and broken strap with missing clasp! Total mess AD Rolex at Stratford and in Sheperds and Bush Westfield advised wheel just buy new watch! As also it did have water damage! Sounds crazy threatening haha but hey my life is to sweet so I wanted trouble on my head! Could not keep out of it! Won the bids and watch was shipped from Netherlands crazy part paid 780£ with customs another 90£ approx to be released to me from DHL! Now fast forward bought loads of parts and genuine parts along with aftermarket to keep within reasonable costs! Most genuine parts are new except few that are original from the watch some light rusting was on automatic movement but managed to clear most just few bright orange spots but hey better than it was! Now balance wheel the hair spring and bridge and palet fork and escape wheel brand new extremely expensive around 1900£ for those parts as had no choice! Now all assembled on aftermarket service main plate with Rolex standards quality! Some movement minute wheels and gears are generic aftermarket, all automatic movement and all bridges are genuine original, same for barel and spring all original, date and date disk genuine! Has some of the most beautiful sound of changing date what a pice! now the issue after assembly and oiling the jewels with Moebius hp9104 and hp9010 and also with grece 8301 on some friction parts and on inside wall of barrel spring all was put together and I use spring winder tools I also have magnifying glasses and magnifying headset got loads of toys to make it work just don’t have the ultrasound cleaner and microscope sadly, all money went to this life project! so issue is that somehow my minute wheels would stock won’t move freely when fully assembled and same time for paper fork and escape wheel, and my balance wheel would only rotate half way it’s like there is something not allowing it to move! I have re visit watch movement 2 times and also checked under magnification all pins and pivots all in place and in great chape as I learned if something won’t move to not force as this can cause tension and brake something and that would be an crazy money lose! So I’m very patient and cautious! At this point need some help and guidance step by step! As still new in this and I did practice on a clone movement to make sure I know were is all and in process broken escape wheel on clone but again that is 78£ comparing to my now 4890£ 3235 movement! see some photos below and YouTube video

Hi! My name is Sebastian and I know not a lot or anything about watches. But this old xeric is watch my father gave me. The skinny hand on top fell off and isn’t working anymore. I’ve tried taking it to xeric company and several jewelers in town. However, no avail no one is able to fix it. And idk where to go or who to ask to get it fixed. I would love to get it fixed since this is my first watch and it means a lot to me

Hello I have an old Timex Marlin and it's getting a lot of condensation from normal use. I wanted to change the gasket and it looks like this one is damaged. Anyone know the size of where I can get this? Thank you!

This movement is a little over my head for a newbie. I wanted a GMT watch so thought I would build one. I am baffled by the mechanism that retains the stem and how did I mess it up. The first challenge was removing the winding stem by pressing on the noted spot in the following image: This is a mystery to me when trying to find this in the technical document [https://drive.google.com/file/d/1juZKswxGGjhlCn_CD255w7OnV31vqrDF/view?usp=sharing] Was the stem position an issue when I pressed this release button? A button that seemed to have no movement when pressed. Is there something in the keyless works that got messed up by having the stem in the hand-setting position when pressing the button? How do I fix it?

I love jump hour watches, and I couldn't resist this black and white Oberon. Overpaid for it a few months ago as "needs repair," I'm finally tearing into it now. It looks like the previous owner did the old "soak it in oil to make it run" trick, but it was definitely not running. Came to me fully wound. The balance seemed free, but wouldn't oscillate, so I set about disassembly. Everything, including the dial, date, minute, and second rings are completely soaked in oil. The main plate is marked BF 866, which looks like Baumgartner's mark. Now I just have to figure out how to get the barrel open. Well, there's your problem. I don't know what that black crud is, but it was definitely gumming up the works.

Hi, I have managed to get hold of a singing bird cage at a reasonable price after years of trying. It's not working...I would like some advice on what solutions to use to clean it as I think it just requires a good clean, nothings broken. Can anyone tell me what make of cleaner to use and what lubricant would be best, have attached photo's! Thanks

My latest repair/restorations — running super strong. I’ve done like 2 dozen of these repair/resto this year alone and generally put them back on eBay to try to recoup costs. I like these so much I might just keep them for myself.

Good (insert time here) everyone! I am relatively new to the world of clockwork repair and maintenence, but have done delicate metalwork, mechanism cleaning, and enjoy fixing things. Just recently, my sister brought home her boyfriends late great grandmothers singing bird in cage automata. For those of you who dont completely know or understand what it is, its basically a spring driven mechanism using bellows and a variable organ pipe to make bird sounds and move a little birdie around and "sing" (Example of singing bird mechanism working). His aunt wants it to be operational again, and after opening it up (not yet taking much apart) I have come to the conclusion that it could just use a good cleaning and oiling. But, my question is, what kind of oil should I use and how should I apply it? I don't have any fancy oils except for a bottle of valve oil for my trumpet at my current disposal, but I would like to buy some decent clockwork oil for this project and a sankyo music box repair I have waiting. Note: come to find out while writing this, it was made by eschle reuge I'm Germany, probably around the 50's or 40's.

Hi all, Can you help me identify this movement? I think I know what it is (cheap chinese) but just wanted to pitch for confirmation... (so won't say what I think it is) I have measured it as: (I think...) Diameter 26.0mm Height 4.9mm Height with hand pinion 7.3mm I am a complete newbie at even taken a case back off despite being a bit of a collector. This movement is broken and crunches when I wind it. So I want to replace it. The watch itself was a gift (and undoubtedly a fake/replica) but I want to get it working again by replacing the movement. Ideally, I want to keep the current hands (hr, min, sec) and crown/stem. It just has a date complication at 3 o'clock. Just a like for like swap seems the simplest thing to do? But open to any suggestions. I'm not bothered if it's a cheap chinese movement, I just want to get it working so I can wear it now and again. Any advice or help would be most appreciated. Many Thanks, Dan.

So I went to a place to get my battery replaced and the person ended up knocking one of the pointers out of its place, now I image to get this fixed I would have to remove the crown in order to access the front part, I however am not sure how to do this in this particular watch as there is no release as far as I can see, but yea in the first picture the sub dial has fallen into the area where the other sub dial is, and I am trying to get that back in place and the second picture I have removed the plastic bit and trying to figure out how to remove the crown but the things I have tried did not work, and I do not wish to damage the watch. Any help would be appreciated thank you!

I got a replica rolex 3235 movement, a complete clone as far as I can see with me. Used for a submariner homage project I embarked on. 2 Months in, when I took the hands out for a polish and cleaned the dial, after I had replaced the hands and recased, the minute hand and hour hand started to intermittently stop and lag behind. The second hand was perfectly running at a nice -5 seconds a day. I took it apart for an inspection, nothing looked broken in the gear train, and the timegrapher numbers were still excellent, but realised that the hands would shift extremely easily when pushed. I never took notice whether that was normal or not, but based on my suspicion and a little extra research I concluded that the canon pinion was loose on the center wheel arbor, So here is the issue, there are no known 'good' watchmakers in Singapore that will work on this replica movement, and its quite difficult to find parts, unless I swap it out with a genuine canon pinion. I've heard of a cheap way to tighten it using a shaved down blunt nail clipper, but would like to know. How 'tight' is tight, when I push the hands while the crown is in the hand-setting position, am I able to push it? will it require alot of force? or just not move at all without breaking it? Is the friction-fit canon pinion just supposed to be tight enough that when the setting gears are tucked away, the centre wheel can continue to power the watch? and while the second hand is hacked, there enough slip that the hand can be set by the crown? Are there any other options to repair it? Im still a student so a cheap option of repair would be nice. Thank you all for reading.

Hello everyone! This is my first time posting here, so please bear with me if I’m not used to the structure or layout of how to properly use the forum. So, I have an issue with this movement which is labeled M 102, and had a curious arrow-triangle engraving on the barrel bridge. I bought this watch for cheap, and even once I screwed a new crown onto the stem (old crown was broken and lost before I got it), it wouldn’t take a wind. I opened it up, and observed the ratchet wheel spinning with no resistance when winding. So my first though of course was a broken mainspring. But in fact, the mainspring, mainspring hook, and the hook on the barrel arbor were all in superb condition (albeit dirty covered in old grease). So my next thought was to see what was happening more closely when winding. And it turns out, when winding, the entire barrel spins with the ratchet wheel! Okay, so broken escapement? But no, the train of wheels didn’t move at all while the arbor spun. FINALLY I looked at the next step in the train of wheels, the center wheel. With just the barrel and the center wheel fitted, the center wheel is turned properly. But with ANY resistance (such as the third wheel being put in), the center wheel itself stops, and the center wheel pinion spins freely, loose in the wheel. With the wheel removed, at one point I put it in a pin vise (with BARELY any pressure applied) to showcase just how loose the wheel actually is, and it is very barely on there, able to spin and wobble freely Attached are pictures of the center wheel removed from the movement. Also attached is a picture of the engraving on the barrel bridge to help ID the caliber if I haven’t already. So, my question is, does anyone have any reference material, or perhaps know which stake/method I should use to stake this pinion back tight into it’s wheel? Thank you so much!

Hi, I've posted about my challenges sorting out broken jewels on three separate movements in another thread (see below). At this point however I've decided that the job requires skills, materials and tools that I do not posses (with skills being the most critical void). That said, I'd like to find some help and am willing to pay to have the work done. I've reached out to JD Richards on two separate channels (his gmail account and this forum's messenger service), since I believe he does this kind of service, however he has not responded--so not sure if he is otherwise engaged or simply not interested. If anyone else on the board is a serious hobbyists with the proper qualifications and is willing to take this kind of job on for a fee (or knows of others who they can refer me to), please message me directly or feel free to contact me directly using my personal contact info below. These movements are not valuable or historically significant IMHO-they were purchased for less than $50 each on eBay as learning platforms for me as I attempt to teach myself basic watch repair through on-line courses, reading and practical experience. In that sense, these movements have been 'successful'. However having reached the limit of my skill with these particular movements, I would like to see them in working order so I can case them up and hand them off to friends/family as originally planned . Thanks in adavnace--Levine98 (804) 998-3519 *****@*****.tld

I decided to build my own ETA 2824 automatic watch recently. I spent time picking out all the parts I wanted, received them and put them all together with minimal trouble. After sizing the stem and fitting it to the crown I cannot get the stem to go back. After struggling for a minute or two I noticed that even when the stem was removed the movement continued to tick. I did make sure that the watch was in a time setting position before removing the stem. But now I’m one step from completing my watch build and have no idea what to do to fix it. This is the only watch experience I have yet had so I really hope it’s not a difficult fix. Any help would be greatly appreciated!

Small success story... not long after my wife and I were married (25 years ago) we were walking through Fordingbridge UK and the small jeweller's shop was closing down. In the window they had a display of new old stock Oris watches including an SA7445 with an exhibition back... later on that year, my wife presented me with the 7445 for my birthday. I wore the watch every day for 10 years, had it regularly serviced. However, about 15 years ago I was giving a lecture (cell biology (yawn)) in Belgium and whilst waving my hands around enthusiastically I felt something go cataclismically "sproing" inside it. The auto-winder span round and it died. The watch has sat in a draw neglected since. I've made half hearted attempts to get it fixed but no watchmender has been interested. Recently have been reading around, watching various videos, acquiring tools and started renovating quartz watches. Last weekend I plucked up the courage, sharpened my screwdrivers, got out rhe tweezers, loupe and rodico and investigated the Oris... I found that the all the screws in the rotor and the automatic mechanism were loose and the click had become disengaged. After a couple of hours I reassembled the auto wind, re engaged the click ratchet but the watch still didn't work. Then I noticed that one of the screws that holds the auto wind mechanism in place was missing. As I'd never had the watch apart before the logical conclusion was that the screw was somewhere inside. So... I carefully disassembled everything again and started to delve deeper into the movement... sure enough... there was the screw, jammed in the gear train. Gentle prodding and coaxing loosened it and I was able to shake it loose. Hey-Presto... the watch immediately started ticking and woke up after 15 years of suspended animation. After reassembly and ensuring everything was screwed tight... I proudly showed my wife the fruits of my labours. Sadly... she can't remember giving me the watch in the first place... oh well....

Hi There. I recently bought an Elma Super Elite cleaning machine and need to replace the old metal holder with the new, blue plastic version. The problem is that the old are stuck to the metal rod. When I spin it, the holder turns freely, but when I try to pull it from the shaft it does not budge. I was therefore wondering if anyone had any suggestions as to what to do.

Here is my cat "Lew" helping me adjust a pocket watch and adding a hair to places one should never be.

Hi friends, I have a 1970's Slava Soviet made watch my uncle gifted me when I was 9... I have kept it in mint condition all these years and for some reason I decided to have it serviced. I took it to a watch repair shop (had 5 stars) spoke with the employee and specifically asked to have the watch back in the same or better condition, when I got it back 6 weeks later I noticed they had scratched and damaged the bezel and changed the spring (even through I asked to call me incase any part needs to be replaced) Now I need to replace the bezel so thats its not chewed up, the factory does not make parts for it and I am distraught as it was in perfect shape and it took someone else to ruin the watch. I only blame myself but it hurts ? Please help me find the bezel and get it back to its former self as much as possible.

Hello! The outer part of the rotor on my grandpa's lucien piccard seashark (AS 1580 movement) has come loose. Is there any way to repair this rotor or must it simply be replaced?

Hi. Aftet many hours trying to fit a seagull st36 to a hamilton kahki case I think I'm done. First recieved movement and put all parts together with a pleasef smile on my face. Then the second hand stopped.... Aftet advice i took parts apart fiddled with second hand and rebuilt parts. This time the stem just doesn't engage properly and slips in and out easily. Movement is fine it seems but stem just doesn't want to play. It did when first assembled. So i am figuring i just want it working and want to send it off to someine far more experienced than I....any sugestions?

hi am not by any means any type of expert but thought this was the best place to start

hi everyone, today I was working on a watch (the movement was eb8810) and after I was happy with the result I put the movement under a. glass, come back to it 2-3 hours later, still ticking so I put it back in the watch case and after about 15 seconds it stoped ticking as I started to move it around I don't know where to go from here wether or not it needs re-oiling or a new part in the balance operation, this is not the first watch I have experienced this in and didn't end up doing anything with the other watch. thanks in advance, Ali p.s I am looking for an eb8800 movement in working condition so message me if you have one

Hello Everyone, I recently bought myself a cheap repair kit and I successfully changed the battery on this watch that was dormant in a drawer for about 4 years! However, the problem is I haven't done something right as the day sub dial is ticking away same as the second hand sub dial!, I'm sure it isn't meant to do that. I'm obviously putting it back together incorrectly and also the two little white plastic cogs you can see in the pics, I can't remember where they go?! If someone please can talk me through the process it would be massively appreciated or any pointers, advice would be great. Thank you

Hello. A few weeks ago, my watch got broken. Please see this image: It's not possible to put it back in, because it wont allow you to change date (it can still be taken out as well).. This happend when I tried to change the time of the watch. Any clues? What can I do to fix it? Is it easy to fix?

Hi all. I'm absolutely brand new to the world of mechanical watches, but have always been fascinated by the way they functioned. So, I took my first step into them, getting myself a cheap, crappy ebay mechanical watch with a chinese movement. I knew that by all accounts this would be a rubbish movement and mechanism, however I wanted something that I could take a look at without risking any sort of investment, gauge my interest in the hobby etc. However, after receiving it, one of my friends let me know that he had a near identical cheap watch that was broken, and offered me to have a look at it as practice. I agreed, and have spent the last few days doing research and taking it apart, before putting it back together again. I've managed to learn quite a lot from it, however I've found that when putting it back together again, the pole of the escape wheel that keeps it in place either end seems to be too short, as though something had broken off. This means the wheel is sat basically loose and wont reach the crystals at either side to keep it in place while it spins. I see no way to fix this, so i intended to get a new wheel to replace it with, however I can't find the name of this type of movement anywhere. It is the kind used in this: ( https://www.amazon.co.uk/Jechin-Skeleton-Hand-Wind-Leather-Mechanical/dp/B00VPRZC50/ref=asc_df_B00VPRZC50/?tag=googshopuk-21&linkCode=df0&hvadid=290896788181&hvpos=1o3&hvnetw=g&hvrand=13027367026987882679&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9047006&hvtargid=aud-545868369748:pla-468442151749&psc=1 ) . If I really wanted to I think I could just order one of the other watches that I've found that use this movement for £5-6, however I was hoping I might be able to keep to my strict student budget and get just the escape wheel somewhere. Does anyone know where I'd be able to find something like that? p.s. Apologies for the lack of knowledge on the subject, I know I'll come across a bit new to the whole thing, but trying to learn as I go