Jump to content


  • Content Count

  • Joined

  • Last visited

About horsetrailer

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Cousinuk.com Or Ofrei.com. OEM Omega aint cheap. You could size a 3rd part crystal with tension ring. You need the correct die for your press for tension ring crystals
  2. Id bet it's something in the train or the fourth wheel. You didn't say that when it stops the second time around that it stops in the same exact spot. That would indicate a damaged 4th wheel or its pivot Sent from my iPhone using Tapatalk
  3. Does is stop EVERY minute of you lightly push on the gear train to get it running again? Put a small sharpie mark on the tooth of the 4th wheel and see if it stops in the same place. If so its the 4th wheel and was probably dropped. Sent from my iPhone using Tapatalk
  4. Hi. These are available from star time supply and ST supply in the states. I just ordered a crown for a 6309 8900. I also sourced uncut replacement stems for future snafus from Star. I hope this helps. I know your not in the states but it's an option Sent from my iPhone using Tapatalk
  5. Let me clarify. This is not a 6309 diver. It is a vintage Seiko 5 7309-8900. It has a 1 piece non screw down crown that has an o-ring on the stem section. I have a replacement crown which accepts a tapped stem. This new crown has a Seiko part number. The part number above is a Seiko part number for the stem only sans crown. Not a 1-piece stem and crown combo. Sent from my iPhone using Tapatalk
  6. Hello all I am in need of a stem for a Seiko 6309. The part number is 354601. The Seiko 5 I am restoring had a big dent in the crown but is a one piece. I have a NOS crown, but it's a screw on. I have called all the suppliers I know in the US and checked eBay. EBay has one for $15 plus ship! Any other suggestions? Sent from my iPhone using Tapatalk
  7. Also try Rob at Monsterwatches.nl Sent from my iPhone using Tapatalk
  8. I would give you my SKX hands but I'm in the US. Did you try Cousins UK? Sent from my iPhone using Tapatalk
  9. I hear you. I've tried three independent watchmakers in NYC and they all were crooks and incompetent. However the Rolex Service center in NYC did an amazing job on my sea dweller and even followed my instructions on how I wanted it regulated Sent from my iPhone using Tapatalk
  10. Mark. I am very interested in signing up but I was wondering if you have any terms and conditions? For example can I cancel at some month later down the road? For example. What if you decide to not do any videos for several months or disappear altogether? Would you be able to terminate the ongoing payment? Sent from my iPhone using Tapatalk
  11. I took all your advice and starting using my reading classes instead of my progressive everyday glasses and it is much improved. Also I invested in a better 4x and 10x loupe and I find that they work fine with glasses off. Just the working distance changed a little. Quick question for clock boy. I was thinking about getting a stereo inspection scope for better jewel inspection and the ability to take a picture ? Any recommendations? Sent from my iPhone using Tapatalk
  • Create New...