Jump to content

vinn3

Member
  • Content Count

    2,063
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by vinn3

  1. a lot of things have changed since 1945. espesally the formula for gasoline, get a newer manule. vin
  2. I rember the part name list. haveing a hard time finding it ! i'll keep looking. vin
  3. notice the flats. a large cresent wrench can turn this. you need a "fixture" to hold the case securley. i use the wooden block. this case has fine threads and might be "cross threaded". be careful, good luck. vin
  4. gasoline has no place for watch cleaning. it can be used for paint thinner with enamel, it can be used as a first clean on a clock mvt., (the clock will run when submerged in gasoline). then wash it off with a garden hose. AND don't smoke around gasoline. vin
  5. welcome to the forum ! guns and watches; reminds me of a pawn shop in town. vin
  6. good show ! there is a site here for military watches. vin
  7. if you are new to running a lathe, use a 3 jaw, jacobs' and collets. most nubies are afrade of a 4 jaw because it takes much more time to get it "on center". with some experience, a 4 jaw can be put on center in15 seconds.
  8. they made a plastic dial caliper. amazingly acurate. i use it for batterys and rough work. vin
  9. "nothing new here" for many years there have been pressure gauges - oil filled to stop rust. i think not used in submarines. i have bought many used watches swamped with oil or wd - 40 . vin
  10. the stem may be rusted on the crown gear inside.
  11. be careful, 1 full turn may be enough. put the crown on 3 turns to hold on while pulling. vin
  12. a 4 jaw chuck would be a better investment.
  13. i have a stand up, low and a mediun which is at the window sill for the sun light. the stand up is great if you have a back ache from mowing the lawn.
  14. yes, wikpedia. that is what a graduate chemist would do.
  15. The photo Forum is just were you can get a good answer for film or digital cameras AND schooling. vin
  16. ah yes; the white coolant and overhead belt drive.. good show, where ever did you find this? vin
  17. i have one like that (somewere), but, where the strange screws are is where the "spring clips" held the mvt. in the case. this could be a modification. vin
  18. welcome to the forum Linc. this forum has experts world wide. cheers, vin
  19. "machining makes the world go round" i don't have youtube. vi
  20. i useto ware them with a double chain. also used "jeans watch pocket" till the chinez made pants with a very small watch pocket. nothing good seems to come from that country !! vin
  21. in the US we have "drill rod" oil or water quench. i don't know the metal formula, but it works good for me. vin
×
×
  • Create New...