Jump to content
  • The watch repair course and videos section has moved - if you are a Patron via Patreon or a WRT Subscriber, kindly create an account here: https://www.watchrepairlessons.com, if you have not done so already, in order to continue with your access to the Early Access and Ad-Free videos.

    The Patron and Subscribers section in the WatchRepairLessons.com dashboard (direct link) will detail all your subscription details. 

    This will help me consolidate all my videos under one roof rather than maintaining two separate systems, and it will also help clean up WRT a bit.

    If you have any questions please message me, Mark :)

Watch Repairs Help & Advice

If you are a new member, we would consider it polite for you to introduce yourself here before posting your questions ;)

Need help with your watch repair? Then post your watch repair questions here. Photographs allowed and encouraged. Please UP vote the most useful answers and if someone has helped you, don't forget to click 'like' on their post.

Explore Questions

There are no popular questions to show right now

  1. Landeron 248 modified 4th wheel

    Asked by Gabe90,

    0 votes
    0 answers
  2. What is this movement?

    Asked by Henry1111111,

    0 votes
    2 answers
  3. 0 votes
    8 answers
  4. Capped 3rd wheel pivot jewels

    Asked by CaptCalvin,

    0 votes
    17 answers
  5. Pocket watch jewel needed.

    Asked by Len33,

    0 votes
    7 answers

4,940 questions in this forum

  1. 0 votes
    3 answers
  2. 0 votes
    15 answers
  3. 0 votes
    12 answers
  4. Casing issue

    0 votes
    12 answers
  5. 0 votes
    21 answers
  6. 0 votes
    7 answers
  7. 0 votes
    3 answers
  8. 0 votes
    6 answers
  9. 0 votes
    4 answers
  10. 0 votes
    2 answers
  11. 0 votes
    9 answers
  12. 0 votes
    4 answers
  13. 0 votes
    4 answers
  14. 0 votes
    3 answers
  15. 0 votes
    1 answer
  16. 0 votes
    19 answers
  17. Balance Spring

    0 votes
    4 answers
  18. 0 votes
    6 answers
  19. Nav

    0 votes
    4 answers
  20. 0 votes
    3 answers
  21. Is My Pallet Fork Misaligned?

    0 votes
    32 answers
  22. 0 votes
    4 answers
  23. 0 votes
    9 answers
  24. 0 votes
    5 answers
  25. 0 votes
    8 answers
  • Recent Topics

  • Posts

    • I use 3 and 4 jaw chucks, large and small on a "compound lathe".   how does a " bezel - chuck" grab a crystol?  with a 4 jaw,  you invert the jaws and grab the inside so you can cut the outer diameter.   do they make chucks for jewelers lathes?   vin
    • Today, we have a big chunk of 1973 in the form of a Timex Viscount automatic day/date. This repair fought me every step of the way. It arrived with the winder connected to fresh air, and needed a complete strip down to get everything back in order. The day detent spring was misaligned, the date wheel was misaligned, the winder weight was loose, the thing was filthy both inside and out, and even getting the back off initially was problematic. I probably spent a good half hour simply trying to figure out why the day wheel refused to co-operate before I noticed the spring wasn't actually doing anything when the disk was re-fitted, due to the spring being in the wrong orientation. I suspect it got a good hard knock at some stage, which dislodged a bunch of stuff, possibly due to the frustration of the previous owner, as a result of the day wheel not turning. Everything is now all back in order, the hands are correctly aligned, the day and date kick over correctly at midnight. It is ticking away with that characteristic Timex chonk-chonk-chonk and winding nicely. I'm not sure it is going to stay on the hair puller band, I may swap it to something a little more comfortable, as I don't particularly enjoy the bald arm patches look, and my Nordic neanderthal genes mean that my arms are particularly furry. This is what it looked like when it arrived. I'll keep it on for today, and regulate it tomorrow once everything has settled down from the surgery, but it is keeping pretty good time so far. The crystal polished up well, but I still need to give the case back a quick whizz with the polishing pad to get rid of some apprentice marks, probably due to some previous owner's attempts to open the thing.
    • It's, of course, a counterfeit, and not even that well made. Below how a genuine similar one looks like, from Chrono24. As suggested you should open it not just for curiosity but to check if there is water ingress or battery leaking.
    • Hi Gents,   Currently, I try to recondition a 1970 Regency chronograph with a Landeron 248 movement.  Everything is going fine so far. Ordered new mainspring, glass, gasket and pushers as they were a bit stiff. The case itself has been replated as it was also quite worn. I dismantled the whole movement and this is where I have some problem and I would like to ask more experienced members' opinion as I am only a novice. Straight to the issue, I could not remove the 4th wheel. For me, it seems that the bottom of the 4th wheel pivot was formerly broken but still long enough to sit in the 4th wheel bottom jewel hole. In addition, it looks that a small pipe or so was fitted from the bottom plate to the end of the 4th wheel pinion. And this is the reason that I cannot remove it.  Could it have happened as I detailed above or it is a normal thing? Should I remove it anyway and change the whole 4th wheel or the pinion if I can manage to find a replacement. What can be done? what do you suggest? After this, I decided to carry on like that and at the end when I will measure the accuracy, it should show some really bad results in case if there is any affection. And now got to the second issue. So, at the end of the cleaning, I found a small pin in the bottom of the horosolv jar. I managed to find its place. However, I am not quite sure how to fit it again. To be honest, I cannot see its purpose really. From the bottom end, it is underneath the setting lever, and from the top plate also it sticks out hardly any.  Have you got any idea how to solve these problems?   Sorry for the poor quality of the pictures. Hope they help though. Please detail your answers as I am just a beginner. Any help is much appreciated. Gabe   P.S.: Please ignore the notes on some of the images which are not related to my issues. Thanks.    
    • Thanks. Sent from my iPhone using Tapatalk
×
×
  • Create New...