Jump to content

How high to bid

transporter
 Share

Recommended Posts

transporter Super WRT Addict

transporter

Posted
Posted

Jeez, thats 3 mainspring winders ive missed out on now and each one ive increased my top bid substantially and still lost each one by a £1, ive checked all sold items to get aN idea of how much they've gone for in the past and bid atleast £10 more to secure the item, but each time im outbid by a poxy £1.

I know there is no answer apart from bidding stupidly high, im just having a rant as im peeved about losing number 3 in quick succession, cheers for your ears guys.

Link to comment
Share on other sites
oli WRT Addict

oli

Posted
Posted

Mainspring winders are a risky purchase on ebay (I am talking from experience!) 

Ideally you would want to check that the tooth on the winding arbour is in good condition. If worn, the winder is useless. can't really be checked on photos, and most sellers will not be able to answer the question unless they really know what they are selling.

good luck in your search anyway, they certainly make life much easier!

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
 

Jeez, thats 3 mainspring winders ive missed out on now and each one ive increased my top bid substantially and still lost each one by a £1, ive checked all sold items to get aN idea of how much they've gone for in the past and bid atleast £10 more to secure the item, but each time im outbid by a poxy £1.

I know there is no answer apart from bidding stupidly high, im just having a rant as im peeved about losing number 3 in quick succession, cheers for your ears guys.

A lot of eBayers now use  "Sniper" software. The way they work is you put in your max bid and the sniper bids for you with just a few seconds to go. The downside is, so many are doing this that you don,t know if you have won until the very last second and for sellers true bidding is longer happening so prices are being driven down. I no longer use a sniper I just put in the max I am willing to pay. However here are snipers reviewed:

 http://andrewminalto.com/best-ebay-snipers/

Link to comment
Share on other sites
Lambchop Member

Lambchop

Posted
Posted

£30?... wow. I just bought a really nice set of 18 winders, lovely condition. For £300 on eBay. 

There really are no alternatives -I'm never going to spend whatever Cousins/HSWalsh want for a new set.. probably nearly £1k...

I am no stranger to disappointment losing auctions- Top tip is to be braver and put in a BIG bid with 10 seconds to go on a set you know looks right. the actual amount you pay will of course be just £1 more than the other guys bid..

 

  • Like 1
Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted
 

I have just had a look on eBay and there ridicules prices or cheap and poorly maintained. How much is a new one these days. I think I paid something like £30 back in the 70's.

 

That was a weeks wages for me back then!  They were and are expensive items.

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

eBay can be a great source but the bidding can get ridiculous where if not carful the price is higher than buying new. 

If I really want a tool item I first look at these three suppliers. If worried about wear then if possible I purchase new.

https://pennyfarthingtools.co.uk

http://www.daveswatchparts.com

http://www.execulink.com/~lfoord/tools.html

  • Like 1
Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted

All I can say is keep looking and don't restrict your searches just to ebay UK, also look on ebay IS, ebay Australia and ebay Germany is you can find the German translation for the tool you want, just be aware not all ebay sellers in Germany accept paypal and watch out for crazy shipping prices from the USA via the global shipping program.

As long as you have patience you will eventually find them for a price you are happy with.

I look almost every day on ebay AU, USA and UK and have manged to get some great bargains by been lucky enough to be the first person to see a tool listed with a great BIN. I picked up a boxed near new set of 6 Bergeon clone main spring winders out of Queensland a few months back for $150 (£90). I usually own win 1 in 8 to 10 items that I bid on, but then I never overpay on the items.

Link to comment
Share on other sites
transporter Super WRT Addict

transporter

Posted
  • Author
Posted

Yeah its a constant battle with the snipers, I use to use one but it failed a few times so now lime clockboy I put my max bid in early and just leave it, I continue to watch for used/vintage/antique etc etc watch tools just to see what comes up, I have one of the early winders the type you put in a vice (bit like the clock ones) its a nice small one made for watches but it only came with one arbor, I got my old man to get a few more turned out on his lathe, the smallest is the same size as a seiko arbor from a 7002 movement, the largest is the same as a 16s waltham arbor,  I then drilled holes in each one and epoxied a small bit of a dress pin in each hole for the main spring to hold onto.

I now need to make up some sleeves so that I will be be to wind auto mainsprings, I can at the moment wind normal springs but it's a bit fiddly trying to fit the barrel over the wound spring whilst pushing the top lever that holds the spring in place. If I can make up a selection of sleeves then discs to match that will allow me to push the springs back into the barrels im home and dry, but wouldn't mind still finding a set of purpose built arbors and sleeves etc.

Mind you if I'm successful in making these sleeves I might be content with what I've got.

Link to comment
Share on other sites
digginstony Super WRT Addict

digginstony

Posted
Posted

The only thing to remember if living in the UK and bidding on items from non EU countries is:-
1. Any item over £15 you will be required to pay V.A.T. excluding postage.
2. Any item over £130 something pounds will will be required to pay import duties on and postage is calculated into the duty paid.

Sent from my SM-T585 using Tapatalk

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Waggy
      Movement holder made with 3D printer

      By Waggy · Posted

      So here is the new base (v 2.1), I made it so that the base will fit over and swallow the stump of the hand pusher tool (or at least my clone of the tool), I also reduced the OD of the bottom skirt a little as it looked/felt a little large, here are a few pictures and the fake .pdf file which you need to convert to .zip once downloaded.   The cut-out seen on the below image on the bottom of the base should swallow the OD (40 mm, +0.1 mm tolerance) of the stump and the height of the stump 9.5mm (measured to 9.1mm, but rounded to 9.5mm) - let me know if this works for your tool.   Note, I think you may need to print supports for the new internal shelf created? Here is the fake .pdf for just the FreeCAD base file and 3mf files Modular Movement Holder.pdf Here is the fake pdf for complete set of the new base and ring FreeCAD/3mf files: Modular Movement Holder base and ring v 2.1.pdf
    • HectorLooi
      Balance spring fell out of regulator pin.

      By HectorLooi · Posted

      Hi Frank, you have dived headlong into the deep end. Hairspring work has to be the scariest thing a newbie has to tackle. Your hairspring appears to be bent and just putting it back into the regulator would not allow the balance to work properly. It might start oscillating but the performance would not be good. The proper thing to do is to unstud the hairspring, remove the hairspring from the balance, reinstall the hairspring on the stud carrier, reshape the endcurve and centre the collet to the balance jewel hole. This challenge would either make you or break you. Hope that you will be able to fix your watch. Welcome to the world of watchmaking.  Watch this video. It think it'll give you an idea of the task ahead. From your 1st photo, I think you have a etachron type stud. Let me see if I can find a video on how to remove it from the arm.
    • Curare
      Balance spring fell out of regulator pin.

      By Curare · Posted

      Have read of the Tech Sheet attached on the balance section page 12. It may be bent but until you reposition it back in the regulator pins you'll never know. Cheers CJ 4R35B_4R36A.pdf
    • Hawaiikook808
      Balance spring fell out of regulator pin.

      By Hawaiikook808 · Posted

      Aloha All, My Seiko 4R35B movement stopped working today. Upon closer inspection, it looks like the balance spring came out of the regulator pin. This is my first time working on a balance. Any advice on how to get this spring repositioned (back to normal)? I'm pretty sure that while adjusting the beat error on this movement, I must have turned the stud (I didn't even know they turned), and the spring eventually fell out.  Will the spring go back to even spacing when it's back in the pin, or does it look bent? Thanks, Frank  
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Good job, that band matches the watch perfectly.
×
×
  • Create New...