Help - Lower Balance Jewel Needed

[jdrichard]

I'm looking for a lower Jewel in its Setting for a Illinois Grade: 525

Serial Number: Illinois Pocket Watch Information: Serial Number 4676531 (Grade 525)

 

 

 

 

Sent from my iPhone using Tapatalk Pro

[clockboy]

You will have to measure the old jewel and search the supply houses or find a donor movement for a replacement .

[jdrichard]

PIA, a have bought a pile of Illinois balance jewels and none of them fit. Purchased of spec thinking the at least one 12s must fit!!

Sent from my GT-N5110 using Tapatalk

[Federico]

PIA, a have bought a pile of Illinois balance jewels and none of them fit. Purchased of spec thinking the at least one 12s must fit!!

 

Sent from my GT-N5110 using Tapatalk

 

 

 

After measuring try getting it here:

 

http://m.ebay.com/itm/351621417912?_mwBanner=1

 

I have had wonderful experience with him. I would make sure to measure the bushing (brass part surrounding jewel) I think that is what it is called. Make sure you ask him if he has one with the exact same diameter as the original and you should be able to get one that works perfectly for you.

 

 

 

Sent from my iPhone using Tapatalk

[jdrichard]

 
After measuring try getting it here:
 
http://m.ebay.com/itm/351621417912?_mwBanner=1
 
I have had wonderful experience with him. I would make sure to measure the bushing (brass part surrounding jewel) I think that is what it is called. Make sure you ask him if he has one with the exact same diameter as the original and you should be able to get one that works perfectly for you.
 
 
 
Sent from my iPhone using Tapatalk

It is actually the depth of the setting at its first of two steps, outer and inner. In rests on a thin rim I the plate hole. All the jewel setting with jewels I have are too thick. Thanks

Sent from my GT-N5110 using Tapatalk

[Federico]

It is actually the depth of the setting at its first of two steps, outer and inner. In rests on a thin rim I the plate hole. All the jewel setting with jewels I have are too thick. Thanks

Sent from my GT-N5110 using Tapatalk

If only the setting is too thick and the jewel does have some material in front of it have you tried filing the brass down with a honing stone to get the right thickness?


Sent from my iPhone using Tapatalk